Abstract:Layered Li-rich, Fe- and Mn-based cathode material, Li[Li0.2Fe0.1Ni0.15Mn0.55]O2, has been successfully synthesized by a coprecipitation method and further modified with different coating amounts of AlPO4 (3, 5, and 7 wt %). The effects of AlPO4 coating on the structure, morphology and electrochemical properties of these materials are investigated systematically. XRD results show that the pristine sample is obtained with typical Li-rich layered structure and trace amount of Li3PO4 phase are observed for the coated samples. The morphology observations reveal that all the samples show spherical particles (3-4 μm in diameter) with hierarchical structure, composed of nanoplates and nanoparticles. XPS analysis confirms the existence of AlPO4 and Li3PO4 phases at the surface. The electrochemical performance results indicate that the sample coated with 5 wt % AlPO4 exhibits the highest reversible capacity (220.4 mA h g(-1) after 50 cycles at 0.1C), best cycling performance (capacity retention of 74.4% after 50 cycles at 0.1C) and rate capability (175.3 mA h g(-1) at 1C, and 120.2 mA h g(-1) at 10C after 100 cycles) among all the samples. Cycle voltammograms show good reversibility of the coated samples. EIS analysis reveals that charge transfer resistance after coating is much lower than that of the pristine sample. The excellent electrochemical performances can be attributed to the effects of multifunctional AlPO4 coating layer, including the suppression of surface side reaction and oxygen vacancies diffusion, the acceleration of lithium ions transport as well as the lower electrochemical resistance. Our research provides a new insight of surface modification on low-cost Li-rich material to achieve high energy as the next-generation cathode of lithium-ion batteries.

Improvement of Cycling Stability and High-Temperature Performance of Li[Ni0.80Co0.15Al0.05]O2 Cathode by Thin-Layer AlF3 Coating

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Improving the Ni-rich LiNi0.5Co0.2Mn0.3O2 cathode properties at high operating voltage by double coating layer of Al2O3 and AlPO4

Improving Electrochemical Cycling Stability of Ni‐rich LiNi0.91Co0.06Al0.03O2 Cathode Materials Through H3BO3 and Y2O3 Composite Coating

Improved cycling performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 /Al 2 O 3 with core-shell structure synthesized by a heterogeneous nucleation-and-growth process

Improving the Electrochemical Performance of Ni-rich Cathode Material LiNi 0.815 Co 0.15 Al 0.035 O 2 by Removing the Lithium Residues and Forming Li 3 PO 4 Coating Layer

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Structural characterization and electrochemical performance of AlF3-coated LiNi0.45Mn0.45Co0.10O2 as cathode materials for lithium ion batteries

Improving Electrochemical Cycling Stability of Ni‐rich LiNi 0.91 Co 0.06 Al 0.03 O 2 Cathode Materials through H 3 BO 3 and Y 2 O 3 Composite Coating

Improvement of Electrochemical Performance for AlF 3 -Coated Li 1.3 Mn 4/6 Ni 1/6 Co 1/6 O 2.40 Cathode Materials for Li-ion Batteries

Promoting the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Via LaAlO3 Coating

Improve the Structure and Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 Cathode Material by Nano-Al2o3 Ultrasonic Coating

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Ultrathin ZnO Coating for Improved Electrochemical Performance of LiNi0.5Co0.2Mn0.3O2 Cathode Material

Multifunctional AlPO4 Coating for Improving Electrochemical Properties of Low-Cost Li[Li0.2Fe0.1Ni0.15Mn0.55]O2 Cathode Materials for Lithium-Ion Batteries.

Enhanced Cycling Performance of LiNi0.9Co0.08Al0.02O2 Via Co-Rich Surface

Enhancing the Long-Cycling Performance of a LiNi0.8Co0.15Al0.05O2@LaNiO3 Cathode Material by Surface Modification

Electrochemical Properties of α-LiAlO2 Coated LiNi0.4Co0.2Mn0.4O2 by Solid Reaction

Co‐doping of Al3+ and Ti4+ and electrochemical properties of LiNiO2 cathode materials for lithium‐ion batteries

Enhanced Electrochemical Performance and Thermal Stability of LiNi0.80Co0.15Al0.05O2 Via Nano-Sized LiMnPO4 Coating

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials