Abstract:Unstable surface species such as residual lithium compounds and surface lattice oxygen at charge state are detrimental factors for the battery performance of Ni-rich cathode (LiNixCoyMn1−x−yO2, x ≥ 0.6, NCM), which induce serious side reactions and lead to rapid capacity loss during cycling. With the advantages of sufficient contacts between gas and solid, gas reactants are introduced to reducing residual lithium compounds via gas-solid reactions or building protective coatings to isolate surface lattice oxygen from the electrolyte via gas-phase deposition, which effectively enhances the cycling stability of NCM. Atomic layer deposition (ALD), as a special coating technology, possesses both the nature of the gas-solid reaction and gas-phase deposition. It is significant to investigate the mechanism of ALD in enhancing the cycling stability of NCM. Here, we report a method to improving the rate capacity and cycling stability of single-crystal NCM via Al2O3 and B2O3 ALD by constructing a highly Li-ions conductive and electrochemical stable surface. The ultrathin coatings are uniformly coated on the surface of NCM. Moreover, surface composition characterizations show the reductions of residual lithium compounds and formations of lithium-containing coatings after the ALD process. By adding a post-annealing process, Al3+ cations and BO3- polyanions doping form on the surface of NCM, which robustly enhanced the stability of surface lattice oxygen of NCM via strong Al-O bond and B-O bond. Moreover, as acidic oxides, B2O3 shows better performance than Al2O3 in reducing residual lithium compounds during the ALD process. Different from Al3+ cations doping occupying the transition metal ions position, BO3- polyanions doping occupies the oxygen ions position, which does not deteriorate the capacity of NCM. Transformation of residual lithium compounds and stabilizing surface lattice oxygen on NCM greatly decrease the formation of LiF and degradation of surface structure, which is the key to the improvement of rate capacity and cycling stability.

Improving Electrochemical Cycling Stability of Ni‐rich LiNi0.91Co0.06Al0.03O2 Cathode Materials Through H3BO3 and Y2O3 Composite Coating

Improving Electrochemical Cycling Stability of Ni‐rich LiNi 0.91 Co 0.06 Al 0.03 O 2 Cathode Materials through H 3 BO 3 and Y 2 O 3 Composite Coating

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.10O2 by Li-reactive coating with H3BO3

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Improving the Electrochemical Performance of Ni-rich Cathode Material LiNi 0.815 Co 0.15 Al 0.035 O 2 by Removing the Lithium Residues and Forming Li 3 PO 4 Coating Layer

Effect of surface alkalinity reduction on cycling and rate performance of LiNi0.8Co0.15Al0.05O2 cathode materials for lithium-ion batteries

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

LiNi0.8Co0.15Al0.05O2 Cathodes Exhibiting Improved Capacity Retention and Thermal Stability Due to a Lithium Iron Phosphate Coating

Enhanced cyclability and reversibility of nickel-rich cathode for lithium-ion batteries via LiH2PO4 assisted saturated Li2CO3 washing

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

The Improved Interfacial and Thermal Stability of Nickel‐Rich LiNi 0.85 Co 0.10 Mn 0.05 O 2 Cathode in Li‐Ion Battery via Perovskite La 4 NiLiO 8 Coating

Modification research of LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 as a cathode material for lithium-ion battery

Optimizing surface residual alkali and enhancing electrochemical performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode by LiH 2 PO 4

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+-conductor coating

Enhancement of electrochemical and thermal stability of LiNiO2 modified with precursor coating

Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating