Improved cycling performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 /Al 2 O 3 with core-shell structure synthesized by a heterogeneous nucleation-and-growth process

Gaole Dai,Min Yu,Fei Shen,Jiali Cao,Liang Ni,Yanbin Chen,Yuefeng Tang,Yanfeng Chen

DOI: https://doi.org/10.1007/s11581-016-1750-x

IF: 2.961

2016-01-01

Ionics

Abstract:Al 2 O 3 was successfully coated on LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode material by a heterogeneous nucleation-and-growth process with a core-shell structure for Li-ion battery. X-ray diffraction (XRD) measurements were used to indicate that the crystal structure of LiNi 0.8 Co 0.15 Al 0.05 O 2 had no changes and no impurity phase existed after coating. Scanning electron microscopy (SEM) showed differences of surface morphology between coated and uncoated samples. A thin and bright coating layer was visually observed through transmission electron microscope (TEM). It reveals that the thickness of coating layer is 7 nm approximately. Electrochemical measurements were also carried out. Although the initial discharge capacity of the coated sample decreased, the 1-wt.% Al 2 O 3 -coated sample showed improved cycling performance at room temperature (25 °C) and elevated temperature (55 °C). It provided higher capacity retention of 71.7 and 70.1 % for 1C at 25 and 55 °C after 100 cycles, in comparison with 55.3 and 55.8 % for the uncoated sample. Meanwhile, interfacial resistance between active material and electrolyte decreased detected by electrochemical impedance spectroscopy (EIS) test. These enhancements in electrochemical characterizations are attributed to the improved stability of interface and the coating layer which served as the physical barriers to protect the active material from electrolyte attack.