Abstract:The characteristics of a novel atmospheric plasma source generated by a dc double-anode plasma torch have been investigated by measuring its emission spectra and heat flux. The original plasma torch design has been proven to be effective in enhancing the aerodynamic stability and luminous intensity of the plasma arc, as well as the jet length. As an application, a vitrification process based on the double-arc argon plasma has been employed to convert toxic incinerator fly ash into a harmless, stable, and chemical durable product. The vitrified slag exhibits a homogeneous, highly dense, and amorphous glassy structure, which is further confirmed by scanning electron microscopy and X-ray diffraction. The leaching concentrations of the target heavy metals in the slag are decreased significantly and are much lower than the current regulatory thresholds of China and U.S., which reveals that the contaminants have been sufficiently immobilized in the silicate network matrix. It is also determined that the vitrification contributes to the predominant reduction of the specific surface area of the fly ash and to the improvement of the slag hardness. Furthermore, the total concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are also appreciably reduced through the plasma vitrification process with a high decomposition rate of 99.97% in PCDD/Fs and 99.94% in I-TEQ. These results indicate that the vitrified product with good quality has great potential to be used as a viable alternative for construction or geotechnical applications. The vitrification process based on the double-arc plasma technology has been demonstrated to be effective and reliable for the stabilization, detoxification, and recycling of waste incinerator fly ash.

Study on Plasma Melting Characteristics of The Hazardous Waste Incineration Ash and Slag

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals

Pilot Scale Study on Plasma Melting the Hazardous Waste Incineration Ash and Slag

Experimental Study on Vitrification of Fly Ashes from Municipal Solid Waste Incinerator

Plasma vitrification and heavy metals solidification of MSW and sewage sludge incineration fly ash

Vitrification of MSWI fly ash using direct current double arc plasma

Study on the Melting Characteristics of Slag from the Incinerator of Hazardous Wastes Containing Fluorine and Chlorine

Application of Thermal Plasma to Vitrify Fly Ash from Municipal Solid Waste Incinerators

Diagnostic Of Novel Atmospheric Plasma Source And Its Application To Vitrification Of Waste Incinerator Fly Ash

Vitrification Of Mswi Fly Ash Using Thermal Plasma Technology

[Study on Vitrification of Simulated Medical Wastes by Thermal Plasma].

Composition modification and plasma vitrification of bottom ash from industrial hazardous waste incineration

Stabilization of residues obtained from the treatment of laboratory waste. Part 1--Treatment path of metals in a plasma melting system

Plasma Vitrification of Air Pollution Control Residues from Municipal Solid-Waste Incineration

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace

[Study on Vitrification of Fly Ashes from Municipal Wastes Incinerator with a Plasma Torch].

Experimental Investigation of Vitrification Process for the Disposal of Hazardous Solid Waste Containing Chlorides

Comparison of trace element mobility from MSWI ash before and after plasma vitrification

Comprehensive performance evaluation of plasma vitrification for detoxification and valorization of residual wastes

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Thermal Plasma Vitrification of MSWI Fly Ash Mixed with Different Biomass Ashes