Abstract:The possibility of using lasers to achieve previously unobtainable states of matter in the laboratory gained much attention following the demonstration of the first pulsed laser in 1960. In the following few years there was plenty research activity as attempts were made to increase the peak power and focused intensity in order to reach extreme conditions within the laboratory. Laser-acceleration technology is rapidly developing. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (X rays, electrons, protons, neutrons and ions). As a new source of ionizing radiation, dose measurement in ultra-intense and ultra-short laser facilities is of great value for radiation protection of the environment, occupational staff and shielding design in laser device design stage. Owing to the pulsed and mixed characteristics of radiation field around the laser facility, it is really challenging to accurately measure the dose equivalent induced by bremsstrahlung photon in the target chamber of the laser facility. Moreover, the rationality of dose assessment model needs more experimental data and to be further verified. To reach this point, the Monte-Carlo program FLUKA was employed to characterize the radiation filed distribution. Firstly, a complete and thorough target chamber module was established according to the XG-Ⅲ geometry parameter and material composition. The in-chamber and out-chamber dose distribution were then calculated and analyzed based on the existing theoretical model of electron source term and typical experimental conditions. The electron energy distribution, characteristic electron temperature, scaling laws and laser-to-energy conversion efficiency were introduced. Secondly, the typical electron spectrum was divided into four intervals. The portion of different energy intervals to the total equivalent dose was determined. Thirdly, a bremsstrahlung photon dose equivalent measuring module was designed and optimized for ultra-intense and ultra-short laser facilities. The simulation results indicate that: 1) The electron dose equivalent is higher than the bremsstrahlung photons both inside and outside the target chamber; 2) The dose equivalent contribution of 0.15 MeV electron energy interval to the total energy range is dominant, and the module was design based on the conclusion; 3) The designed module mainly consists of PMMA and metallic shielding material. With this approach, the module can reduce the electron dose equivalent to 0.3% and photon dose equivalent to 69.1%. The dose ratio of electron to photon is about 128%. In addition, 5% of the total photon dose is contributed by the occurrence of bremsstrahlung of highenergy electron in PMMA.

Analysis of Angular Distribution and Photon Yield from Bremsstrahlung Targets

SU-FF-T-48: A Study of the Impact of X-Ray Energy and Angular Distributions Produced From 6- and 18-MV Medical Linear Accelerators On Non-Target Exposures

A Simulation Study on the Flash X-Ray Spectra Spatial Distribution

Review of bremsstrahlung photon dose generated from ultra-intense and ultra-short laser target interactions

Calculation of photoneutrons produced in the targets of electron linear accelerators for radiography and radiotherapy applications

Numerical Optimization of Transmission Bremsstrahlung Target for Intense Pulsed Electron Beam

Bremsstrahlung Dose Yield for High-Intensity Short-Pulse Laser-Solid Experiments

Angular Distribution and Conversion of Multi-Kev L-shell X-ray Sources Produced from Nanosecond Laser Irradiated Thick-Foil Targets

Study on Photon Dose of Ultra-intense and Ultra-short Laser Facility Based on Fully Monte-Carlo Simulation

Monte Carlo Simulations for Target Analyses

Optimization of Transmission X-ray Target for Intense Pulsed Electron Beam Accelerators

Betatron Radiation and Bremsstrahlung in the Interaction of Intense Laser Pulse with Solid Target

Neutron–proton Bremsstrahlung As a Possible Probe of High-Momentum Component in Nucleon Momentum Distribution

Determining the Focal Spot Limit of 1 MeV X-ray Targets: Monte Carlo Simulation of the Point Spread Function

Study Of X-Rays Generated By Target In Ct

Bremsstrahlung of 5-25 keV electrons incident on MoSi$_2$, TiB$_2$ and ZrB$_2$ thick solid conductive compounds

Bremsstrahlung Converter for High-Power Irradiation Linacs

Comparison of Photoneutron Yields in Tungsten Calculated by MCNPX Using Different Photonuclear Cross-Section Data for Typical Radiation Therapy Energies

Analysis for Spallation Neutron Source Induced from Proton Incident with Energy of 150 MeV

Time- and Energy-Resolved Measurements and Calculations of X-Ray Radiation Generated by Bremsstrahlung

Research On Nuclear Heat Deposition Behavior In The Spallation Target Of An Accelerator Driven Subcritical System