Abstract:The possibility of using lasers to achieve previously unobtainable states of matter in the laboratory gained much attention following the demonstration of the first pulsed laser in 1960. In the following few years there was plenty research activity as attempts were made to increase the peak power and focused intensity in order to reach extreme conditions within the laboratory. Laser-acceleration technology is rapidly developing. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (X rays, electrons, protons, neutrons and ions). As a new source of ionizing radiation, dose measurement in ultra-intense and ultra-short laser facilities is of great value for radiation protection of the environment, occupational staff and shielding design in laser device design stage. Owing to the pulsed and mixed characteristics of radiation field around the laser facility, it is really challenging to accurately measure the dose equivalent induced by bremsstrahlung photon in the target chamber of the laser facility. Moreover, the rationality of dose assessment model needs more experimental data and to be further verified. To reach this point, the Monte-Carlo program FLUKA was employed to characterize the radiation filed distribution. Firstly, a complete and thorough target chamber module was established according to the XG-Ⅲ geometry parameter and material composition. The in-chamber and out-chamber dose distribution were then calculated and analyzed based on the existing theoretical model of electron source term and typical experimental conditions. The electron energy distribution, characteristic electron temperature, scaling laws and laser-to-energy conversion efficiency were introduced. Secondly, the typical electron spectrum was divided into four intervals. The portion of different energy intervals to the total equivalent dose was determined. Thirdly, a bremsstrahlung photon dose equivalent measuring module was designed and optimized for ultra-intense and ultra-short laser facilities. The simulation results indicate that: 1) The electron dose equivalent is higher than the bremsstrahlung photons both inside and outside the target chamber; 2) The dose equivalent contribution of 0.15 MeV electron energy interval to the total energy range is dominant, and the module was design based on the conclusion; 3) The designed module mainly consists of PMMA and metallic shielding material. With this approach, the module can reduce the electron dose equivalent to 0.3% and photon dose equivalent to 69.1%. The dose ratio of electron to photon is about 128%. In addition, 5% of the total photon dose is contributed by the occurrence of bremsstrahlung of highenergy electron in PMMA.

Bremsstrahlung Converter for High-Power Irradiation Linacs

Optimization of X-Ray Spectra in Medical Sterilization Accelerator through MCNP

Numerical Optimization of Transmission Bremsstrahlung Target for Intense Pulsed Electron Beam

Optimization of Transmission X-ray Target for Intense Pulsed Electron Beam Accelerators

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Betatron Radiation and Bremsstrahlung in the Interaction of Intense Laser Pulse with Solid Target

Study on Photon Dose of Ultra-intense and Ultra-short Laser Facility Based on Fully Monte-Carlo Simulation

Bremsstrahlung Dose Yield for High-Intensity Short-Pulse Laser-Solid Experiments

Study on the Radiation Problem Caused by Electron Beam Loss in Accelerator Tubes

Calculation of photoneutrons produced in the targets of electron linear accelerators for radiography and radiotherapy applications

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Electron Beam Therapy Mode Analysis of Medical Linac by BEAM Code

Design optimization of an electron-to-photon conversion target for ultra-high dose rate x-ray (FLASH) experiments at TRIUMF

Analysis of Angular Distribution and Photon Yield from Bremsstrahlung Targets

Development of High Power Irradiating Accelerator

Beam optical design for high energy electron radiography experiment study based on THU LINAC

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy

Simulation Of Hard X-Rays Source Produced By A Picosecond Laser Irradiated Solid Target For Compton Radiography

Dose estimation and shielding calculation for X ray hazard at high intensity laser facilities

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Physical Analysis of the Radiation Shielding for the Medical Accelerators