Abstract:The existing SPECT system for nuclear cardiac imaging suffered from low sensitivity or high cost. In this study we implemented a novel design of the stationary dedicated cardiac SPECT combined with multi-pinhole collimators based on the clinical dual-head scanner with low cost. Previous simulation study has demonstrated the feasibility of the design.Accurate geometry calibration was implemented for image reconstruction. The projection of a 2-mm-diameter sphere source, which was mounted on patient bed and moved through three certain gridding scanning orbits, was acquired for calibration. The geometrical parameters were estimated by fitting the experimental projection centroids to the geometrical model. The reconstruction adopted MLEM algorithm with GPU parallelization based on CUDA. Considering the impact of large pinhole size on image reconstruction, two analytical pinhole models (sampling pinhole model and dual-section Gaussian model) were proposed to derive the system matrix on the fly during reconstruction. The sphere source projection of one view was reconstructed with the two analytical pinhole models and delta model. The reconstruction results of different views' projection were compared. Furthermore, the myocardium phantom study in comparison with parallel-hole SPECT has been performed to evaluate the system.With geometrical calibration, the reasonable reconstruction images were achieved with 10.6 x 12.9 x 9.6 mm(3) spatial resolution (FWHM). Analytical pinhole models improved the spatial resolution to 6.8 x 8.0 x 7.2 mm(3) and suppressed the deformation while dual-section Gaussian model were slightly better than sampling pinhole model. There was no significant difference between the reconstruction images with one view's and three views' projection, which indicated the stationary imaging property of the SPECT system. Myocardium phantom study demonstrated the superior performance and better defect identification of our proposed SPECT than parallel-hole SPECT.In conclusion, our initial results showed the reasonable images could be achieved on the proposed stationary multi-pinhole dedicated cardiac SPECT. In the future work, more phantom and in vivo experiments would be implemented to evaluate the dedicated cardiac SPECT system.

Nuclear medicine diagnosis CCD imaging device design

High Resolution X-Ray Medical Sequential Image Acquisition and Processing System Based on PCI Interface

Next Generation Dedicated 3d Breast Imaging With Xact

CCD Based Digital Radiography System

A High-resolution Colloidal Quantum Dot Imager by Monolithic Integration

Development of a Medical X-ray CCD Camera System

CCD Digital Radiography System

Development and Evaluation of A Ccd-Based Portable Digital Flash X-Ray Imager

Hardware algorithm design and validation for nuclear radiation imaging based on Monte Carlo simulation

Design and image-quality performance of high resolution CMOS-based X-ray imaging detectors for digital mammography

[Research on the digitized technical remodeling in the positioned picture shooting part of homemade X-ray radiotherapy simulative position finder by use of CR and PACS]

A STUDY ON RADIATION IMAGING MECHANISM AND CHARACTERISTICS IN DIFFERENT INSPECTION SYSTEMS

Conceptual Design of A High-Frame-Rate Fast Neutron Radiography Detector

Design of a novel gamma camera with large field of view for 16N diagnosis in the primary loop of nuclear reactor

High-sensitivity and spatial resolution benchtop cone beam XFCT imaging system with pixelated photon counting detectors using enhanced multipixel events correction method

Recent developments and future trends in nuclear medicine instrumentation.

The X-Ray Imaging System'S Requirements for Ccd Pixel

Design and Optimization of Direct-Conversion Photon-Counting Detector for Dual-Energy Ct Imaging

Development Of Stationary Dedicated Cardiac Spect With Multi-Pinhole Collimators On A Clinical Scanner

Digital Imaging Scanning System and Biomedical Applications for Biochips

Study of a new design of p-N semiconductor detector array for nuclear medicine imaging by monte carlo simulation codes