Abstract:Electromagnetic induction (EMI) systems are used for mapping the soil's electrical conductivity in near-surface applications. EMI measurements are commonly affected by time-varying external environmental factors, with temperature fluctuations being a big contributing factor. This makes it challenging to obtain stable and reliable data from EMI measurements. To mitigate these temperature drift effects, it is customary to perform a temperature drift calibration of the instrument in a temperature-controlled environment. This involves recording the apparent electrical conductivity (ECa) values at specific temperatures to obtain a look-up table that can subsequently be used for static ECa drift correction. However, static drift correction does not account for the delayed thermal variations of the system components, which affects the accuracy of drift correction. Here, a drift correction approach is presented that accounts for delayed thermal variations of EMI system components using two low-pass filters (LPF). Scenarios with uniform and non-uniform temperature distributions in the measurement device are both considered. The approach is developed using a total of 15 measurements with a custom-made EMI device in a wide range of temperature conditions ranging from 10 °C to 50 °C. The EMI device is equipped with eight temperature sensors spread across the device that simultaneously measure the internal ambient temperature during measurements. To parameterize the proposed correction approach, a global optimization algorithm called Shuffled Complex Evolution (SCE-UA) was used for efficient estimation of the calibration parameters. Using the presented drift model to perform corrections for each individual measurement resulted in a root mean square error (RMSE) of <1 mSm−1 for all 15 measurements. This shows that the drift model can properly describe the drift of the measurement device. Performing a drift correction simultaneously for all datasets resulted in a RMSE <1.2 mSm−1, which is considerably lower than the RMSE values of up to 4.5 mSm−1 obtained when using only a single LPF to perform drift corrections. This shows that the presented drift correction method based on two LPFs is more appropriate and effective for mitigating temperature drift effects.

The Preliminary Long-Term Slow Drift Calibration Study in Low-Level RF System

A Novel Microwave Switch-Based LLRF System for Long-Term System Phase Drift Calibration

Research on Frequency Stability of Narrow Linewidth Laser in Resonant Optical Gyro

Research on the Mean-Wavelength Drift Mechanism of SLD Light Source in FOG

Development Of Vibration Environment For Calibration Ultra-Low-Frequency Seismometers

A Low Level Radio Frequency System Drift Compensation Technique by Time-Multiplexing Pick-Up/reference Signals

Design and Implementation of High-Precision Ranging Validation System

Drift Observations and Mitigation in LCLS-II RF

Low-Level Radio-Frequency system integrated with feed-forward control and vector modulation

Development of a digital low-level RF system for the STCF

Temperature Drift Correction for FPGA-Based Time Measurement Systems

A calibration method of the zero-drift for testing system of electronic transformer characteristics

Temperature Drift Compensation in Precision Measurement of Multi-channel Thermal Resistance

Experimental investigation on zero drift effect in Coriolis mass flowmeters

Low-Pass Filters for a Temperature Drift Correction Method for Electromagnetic Induction Systems

A low-delay reference tracking algorithm for microwave measurement and control

A Long Time Low Drift Integrator with Temperature Control

Temperature Drift Compensation for Inclinometer Sensors Based on Kalman Filtering and Neural Networks

Application of TRL Calibration in Longitudinal Coupling Impedance Measurement Platform for BEPCII

Design of a Low Level Radio Frequency Control System for the Direct Current-Superconductive Photocathode Injector at Peking University

Low-level Radio-Frequency System Upgrade for the IMP Heavy Ion Reach Facility in Lanzhou (HIRFL)