Abstract:Unlike a normal packed bed, an expanded bed shows a distinct size distribution of adsorbents along the bed height, which certainly causes the nonuniform characteristics of bed voidage and variation of fluid hydrodynamics and liquid dispersion alone the axial direction. For analysis, modeling, and prediction of the biomolecule adsorption performance in expanded-bed chromatography, the understanding of liquid dispersion along the bed height is fundamental and necessary. On the basis of this background, axial dispersion in expanded beds for adsorbents with a density difference and a log-normal size distribution was investigated. The tracer pulse-response method combining in-bed sampling techniques was used to measure axial dispersion variations along the bed height in a 20-mm-i.d. expanded bed with UpFront FastLine SP adsorbents as test particles. The local effective axial dispersion coefficients along the bed height were calculated and analyzed. There is a decreasing trend of axial dispersion along the bed height at various liquid flowing velocities, which is more remarkable than that for those widely used Streamline particles with a normal size distribution and a relatively uniform density. An empirical correlation for the variations of effective axial dispersion coefficients is recommended based on the hydrodynamic performances within the bed also.

Particles Transport Velocity in a Moving-bed Column for Ion Exchange Resin

Variation of the Local Effective Axial Dispersion Coefficient with Bed Height in Expanded Beds

NONUNIFORM HYDRODYNAMICS AND AXIAL DISPERSION BEHAVIORS IN EXPANDED BEDS

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Variation of the Axial Dispersion along the Bed Height for Adsorbents with a Density Difference and a Log-Normal Size Distribution in an Expanded Bed

Modeling Axial Distributions of Adsorbent Particle Size and Local Voidage in Expanded Bed

The Hydrodynamic Behavior of the Liquid–solid Circulating Fluidized Bed Ion Exchange System for Cesium Removal

Electrostatic Effects on Hydrodynamics in the Riser of the Circulating Fluidized Bed for Polypropylene

Application of Liquid Solid Semi-Moving Bed to Fractionation of Cesium Ion in Wastewater

Particle transport by jet pump in a new liquid–solid circulating moving bed reactor

Acoustic Emission Detection of Particle Movement in A Cross-Flow Moving Bed

Estimation of mass transport parameters in a column packed with BioSep beads

The Particle Removing Characteristics in a Fixed Valve Tray Column

Particle Velocity Distribution and Its Prediction in a 14 M Two-Dimensional Circulating Fluidized Bed Riser

Experimental Study On Bubble Rising And Descending Velocity Distribution In A Slurry Bubble Column Reactor

Modeling of the Adsorption Breakthrough Behaviors of Pb2+ in a Fixed Bed of ETS-10 Adsorbent.

Laboratory Studies on the Influence of Ionic Strength on Particle Transport Behavior in a Saturated Porous Medium

Influence of outward radial gas flow on particle movement in an annular moving bed

Experimental Study on Diameter Selection of the Ion Exchange Tower Resin Transfer Tube and the Resin Transfer Technology

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion

REGULATION OF PARTICLES CIRCULATING AND LIFT IN LIQUID-SOLID CIRCULATED MOVING BED REACTORS