Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Experimental Study on Three Dimensional Movements of Particles I Effects of Particle Diameter on Velocity and Concentration Distributions

Experimental Study on Three Dimensional Movements of Particles II Effects of Particle Diameter on Turbulence Characteristics

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental Study on the 3D Motion Turbulence Characteristics of Bed-load Particles

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental Investigation on Solid Particle Distribution in Dense Solid–liquid Stirred Tank

The effect of flow intensity on the bedload 3D movement

Experimental Study on the Particle Motion in Open Channel Flow

Motion and Orientation of Cylindrical and Cubic Particles in Pipe Flow with High Concentration and High Particle to Pipe Size Ratio

Numerical simulation of the sedimentation of cylindrical pollutant particles in fluid.

Experimental investigation about the incipient velocity of spherical particles on a hemispherical bed surface

Microscopic Analysis of Particle Flow in Moving Bed

Experimental investigation and modeling of particulate transportation and deposition in vertical and horizontal flows

Research On The Motion Of Cylindrical Particles In The Pipe

Numerical study on the motion of two parallel spherical particles with different diameters in upward flow

Experimental study on particle flow characteristics of three-dimensional moving bed

Experimental Investigation of the Effects of Particle Near-Wall Motions on Turbulence Statistics in Particle-Laden Flows

Experimental Studies of Particle Flow Dynamics in A Two-Dimensional Spouted Bed

Investigation of particle size impact on dense particulate flows in a vertical pipe

Density Ratio Effect on Particle Sedimentation in a Vertical Channel

Inertial and Particle Shape Effects on Fluid-Particle Suspension Flows: A Resolved SPH-DEM Study