Abstract:Safety demonstration tests on the 10 MW High Temperature Gas-cooled Reactor-Test Module (HTR-10) were conducted to verify the inherent safety characteristics of modular High Temperature Gas-cooled Reactors (HTGRs) as well as to obtain the reactor core and primary cooling system transient data for validation of HTGR safety analysis models and codes. As one of these safety demonstration tests, a simulated anticipated transient without scram (ATWS) test called loss of forced cooling by tripping the helium circulator without reactor scram was carried out at 100% rated power level in July, 2005.This paper simulates the reactor transient behaviour during the test by using the THERMIX code system. The reactor power transition and a comparison with the test result are presented. Owing to the negative temperature coefficient of reactivity, the reactor undergoes a self-shutdown after the stop of the helium circulator and keeps subcritical till the end of the test. Due to the loss of forced cooling, the residual heat is slowly transferred from the core to the Reactor Cavity Cooling System (RCCS) by conduction, radiation and natural convection. The thermal response of this heat removal process is investigated. The calculated and test temperature transients of the measuring points in the reactor internals are given and the differences are preliminarily discussed. With respect to the safety features of the HTR-10, it is of most importance that the maximum fuel center temperature is always lower than 1230 degrees C which is the limited value at the first phase of the HTR-10 project.The simulation and test results show that the HTR-10 has the built-in passive safety features, and the THERMIX code system is applicable and reasonable for simulating and analyzing the helium circulator trip ATWS test.

Verification Test of Absorption Sphere Second Shutdown System on 10MW High-temperature Gas-cooled Reactor

Verification Test of Second Shutdown System of HTR-10

Verification Test of Control Rod System for HTR-10

Shutdown Safety Analysis of Megawatt-Class Space Gas-Cooled Reactor System

Experimental Study on the Residual Heat Removal System in HTR-10

Experiment and Verification Test of the Once-Through Steam Generator of the 10 Mw High-Temperature Gas-Cooled Reactor Flow Stability of the Once-Through Steam Generator

Full Performance Test of the Steam Safety Valves for 10 MW High Temperature Gas-cooled Reactor

Study of the burnup measurement for 10 MW high temperature

Experimental and Operational Verification of the HTR-10 Once-Through Steam Generator (SG): Heat-transfer and Hydrodynamic Features of the Once-Through Steam Generator

OS8-10 Development of Integrated Modular Water Reactor : Thermal Hydraulic Test for SDHS

Temperature Measuring System of the In-core Components for Chinese 10 MW High Temperature Gas-cooled Reactor.

Experimental Study On Restart Performance Of Absorber Sphere Pneumatic Conveying

Thermal-Hydraulic Analysis of Pebble Bed High Temperature Gas-Cooled Reactor After Shutdown Based on FLUENT Software

Network-based Simulation System for 10 MW High Temperature Gas-cooled Reactor

Seismic Monitoring System in 10MW High Temperature Reactor

Hydraulic pressure test of pressure vessel of 10 MW high temperature gas-cooled reactor

Verification of Alarm Displays for the Nuclear Power Plant with Two Modular High-Temperature Gas-Cooled Reactors

Helium Sampling and Analyzing System of 10MW High Temperature Gas-Cooled Reactor

CHARACTERISTIC TESTS ON TRANSITION CORE OF HTR-10

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Simulation And Analysis Of Helium Circulator Trip Atws Test At Full Power On The Htr-10