Abstract:Permanent magnet Vernier motors (PMVMs) possess the advantage of high torque density for high-performance applications. However, the low power factor challenge makes it unacceptable for direct-drive applications. A lack of accurate modeling method based on the motor sizing law, i.e., air-gap flux density, linear current density, and motor geometry parameters, raises difficulties for machine designers to further conduct research on the performance metrics. This article presents a deep investigation into the analytical modeling technique for surface PMVMs (SPMVMs). It can identify an accurate approach to obtain the performance metrics, including electromagnetic torque and power factor. The modeling technique is developed based on the conformal mapping method. By using this, both radial and tangential permeability functions can be calculated to obtain the motor magnetic loading accurately, considering the leakage flux. The slotting effect on both air-gap flux density and armature-winding function is analyzed to achieve a precise formula for torque and power factor computations. The new modeling technique is applied to integral-slot SPMVMs with different slot/pole combinations, gear ratios, slot openings, and magnet thickness to evaluate the impacts of motor parameters on high-power-factor and high-torque-density designs. Finally, an SPMVM with the characteristics of high torque density and power factor is fabricated to verify the analytical model at the power rating of 0.8 kW and the speed of 500 r/min. The experimental results show that the prototype exhibits a high power factor of 0.9 and high torque density 22.5 Nm/L.

Air-gap magnetic field distribution and inducctance characteristics in a long primary sectional powered variable pole pitch linear induction motor

Improved Analytical Modeling of a Novel Ironless Linear Synchronous Machine With Asymmetrical Double-Layer Winding Topology

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Analysis and Restrain of Mutual Inductance Asymmetry in the Sectionally Powered AC Linear Motor

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Magnetic Field Analysis of an Inner-Mounted Permanent Magnet Synchronous Motor for New Energy Vehicles

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Analysis of Inductance Variation in Permanent Magnet Linear Synchronous Motor

Characteristics Study of Single Phase Deep-slot Linear Induction Motor Based on Field-circuit Combined Model

3-D Analysis of Electromagnetic Field and Performance in a Permanent Magnet Linear Synchronous Motor

Calculation Models Airgap Inductiance of Planar Motor

A Variable Pole Pitch Linear Induction Motor for Electromagnetic Aircraft Launch System

Analytical modelling of air‐gap magnetic field of interior permanent magnet synchronous motors

A Novel Linear Induction Motor for Electromagnetic Aircraft Launch System

FEM Analysis and Inductances Calculation of Linear Motor in Maglev Trains

Modeling and Simulation of Field Oriented Controlled Large Air-gap Linear Induction Motor

An Analytical Calculation Model for Inductances of Multi-Unit PMSM with Concentrated Windings

Investigation of Power Factor Characteristic in Permanent Magnet Motors for In-Wheel Direct Drive Application

Deep-investigated Analytical Modeling of a Surface Permanent Magnet Vernier Motor