Abstract:The accuracy of GNSS timing through standard service could not meet the requirements of new-generation mobile communication, distributed cooperative observation, deep space exploration, and many other fields. The performance of BeiDou-3 Navigation Satellite System (BDS-3)/GPS Precise Common View (PCV) time transfer based on carrier-phase is investigated to address this issue. Using 33-day consecutive observations of 11 stations from the tracking network of the international GNSS Monitoring and Assessment System and the International GNSS Service, long baseline PCV time transfer experiments were carried out from several aspects, including different signals, different orbit products, and real-time and post-processing. The accuracy of PCV time transfer results is evaluated by comparing them with the results produced by PPP time transfer. For the real-time PCV time transfer based on broadcast ephemeris, the accuracy of results with BDS-3 is within 0.2 ns for baselines up to 3000 km, which is better than that with GPS. In the aspect of real-time and post-processing PCV time transfer based on precise ephemeris, while it is hard to get a regular solution with GPS-only observations for baselines over 7000 km, it is still better than 0.6 ns with BDS-only observations. For baselines of 3000 km and less, GPS and BDS-3 PCV results with precise ephemeris are of comparable accuracy. Based on precise ephemeris, the accuracy of real-time PCV time transfer is close to post-processing PCV. From the experiment results, one can find that PCV time transfer is unaffected by the differential code bias at the satellite end and is immune to the day-boundary discontinuities caused by the clock products. The results show that the carrier-phase-based BeiDou-3 PCV time transfer can achieve sub-nanosecond accuracy in post-processing and real-time mode for baselines as long as 7000 km.

STUDY ON DISTRIBUTED PMU FOR SYNCHRONOUS PHASOR MEASUREMENT USING MUTUALLY BACKUP SYNCHRONIZATION SIGNALS FROM BOTH BEIDOU SATELLITE NAVIGATION SYSTEM AND GLOBAL POSITIONING SYSTEM

The Power Angle and Phase Measurement Units Based Wide Area Measurement System and Its Application

REAL-TIME MONITORING SYSTEM FOR THE STATES OF POWER NETWORK OVER ETHERNET AND ATM

Integrated Method for Measuring Distance and Time Difference Between Small Satellites

A GLOBAL CHECKING METHOD OF SYNCHRONIZED PHASOR MEASUREMENT UNIT(PMU)

A New Synchronized Phasor Measurement Unit on Electric Power System

Investigation of global synchronized monitoring system in power systems

SYNCHRONOUS MEASUREMENT PRECISION OF PHASOR MEASUREMENT UNIT

A Distributed Synchronous Measuring System Based on GPS Synchronous Clock-carrier Power Source

PRESENT APPLICATION SITUATION AND DEVELOPMENT TENDENCY OF SYNCHRONOUS PHASOR MEASUREMENT TECHNOLOGY BASED WIDE AREA MEASUREMENT SYSTEM

A Timing Scheme for Power System Based on Multi-Timing Source and Multi-Mode of Timing

State estimation for distribution systems using micro-synchrophasors

A new method of real time and synchronous measurement on power network phase parameters

Remote Phase Synchronization For Satellite Network Systems

Accuracy Analysis of BeiDou-3/GPS Real-Time Precise Common View Time Transfer Based on Carrier-Phase

Dynamic Monitoring and Control System Based on Synchronized Phasor Measurement in Heilongjian Eastern Power System

Device for Wide Area Electric-Network State Measurement Based on GPS

WAMS Applications in Chinese Power Systems

Micro Pmu Based Monitoring System For Active Distribution Networks

High-Accuracy Phase Frequency Detection Technology Based on BDS Time and Frequency Signals

Framework of Synchronous Dynamic Security Monitoring System Based on PMU