Abstract:Previous tensile tests showed that the typical coarse-grained (CG) interstitial high entropy alloy (iHEA) with the nominal composition Fe49.5Mn30Co10Cr10C0.5 (at.%) has higher yield stress and better strain hardening at cryogenic conditions compared to that at room temperature. However, the yield stress of the fine-grained (FG) iHEA is little influenced by decreasing temperature, while the strain hardening is significantly enhanced. The fundamental reasons for these observations need to be further investigated. Thus, a micromechanism-based crystal plasticity model is developed to investigate the temperature effect on the tensile behavior of the iHEA. A thermodynamic model is established to calculate the stacking fault energy of the iHEA at different temperatures. The developed constitutive model is verified by comparing the simulated the stress-strain curves and martensite volume fraction of the CG and FG iHEAs at different temperatures with the corresponding experimental results. Moreover, the contributions of different strengthening mechanisms, such as dislocations, grain boundaries, nano-precipitation, and lattice friction, are quantified to reveal the effect of temperature on the iHEA's yield stress. Furthermore, the grain size effects on deformation twinning and martensite phase transformation are considered. The developed constitutive model is further applied to predict the stress-strain curves of the iHEA with various grain sizes at different temperatures. The present study thus provides a useful modeling tool for understanding the underlying mechanisms of the strength and plasticity in the iHEA, paving a way for optimizing the mechanical properties of advanced alloys at various temperatures.

Study of thermal stress and strain energy in gamma Fe matrix around inclusion caused by thermal coefficient difference

Study on the plane stress mode II crack–inclusion interaction with coupled mechanical and thermal strains

Study on the Crack–inclusion Interaction with Coupled Mechanical and Thermal Strains

A Numerical Method for the Thermal-Shock Crack Problems of Nonhomogeneous Materials with Inclusions Based on an Interaction Energy Integral Method

An Isoparametric Inclusion Model for Determining the Thermo-Elastic Fields Produced by Varying Eigen-temperature Gradients

Energy variation and stress fields of spherical inclusions with eigenstrain in three-dimensional anisotropic bi-materials

Analysis of Inclusion in Thermoelectric Materials: the Thermal Stress Field and the Effect of Inclusion on Thermoelectric Properties

Discussions on Nucleation Mechanism of Intragranular Ferrite in Inclusions

A New Model for Analyzing Thermal-Stress in Granular Composite

Thermoelastic problem of two arbitrarily-shaped inclusions

INSTANTANEOUS THERMAL-EXPANSION BEHAVIOR OF HETEROGENEOUS MATERIALS WITH A WORK-HARDENING ELASTOPLASTIC MATRIX AND ELASTIC SPHEROIDAL INHOMOGENEITIES

Effect of Non-metallic Inclusions on the Local Stress Concentration Within Materials

Creep and Stress Relaxation Behavior of Metal Matrix Particulate Composites Induced by Interface Diffusion with Coupled Thermomechanical Strains

Cavitation of inclusion in elastic matrix under uniform changed temperature

Analyses of thermal and residual microstresses between the particles and matrix of composites

Crack–inclusion Interaction Due to Mismatched Thermal Expansion under Plane Stress Condition

Photoelastic Investigation of Interaction Between Matrix Crack and Different Shapes of Inclusions

Ferrite Formation Dynamics and Microstructure Due to Inclusion Engineering in Low-Alloy Steels by Ti2O3 and TiN Addition

Experimental Analysis for Thermal Stress in Functionally Gradient Material

Ab Initio Calculations on Elastic Properties of IF Steel Matrix Phase at High Temperature Based on Lattice Expansion Theory

Temperature effect on tensile behavior of an interstitial high entropy alloy: Crystal plasticity modeling