Abstract:Method of soft metal (Cu) strengthening of Ti3SiC2 was conducted to increase the hardness and improve the wear resistance of Ti3SiC2. Ti3SiC2/Cu composites containing 15 vol.% Cu were fabricated by Spark Plasma Sintering (SPS) in a vacuum. The effect of the sintering temperature on the phase composition, microstructure and mechanical properties of the composites was investigated in detail. The as-synthesized composites were thoroughly characterized by scanning electron micrography (SEM), optical micrography (OM) and X-ray diffractometry (XRD), respectively. The results indicated that the constituent of the Ti3SiC2/Cu composites sintered at different temperatures included Ti3SiC2, Cu3Si and TiC. The formation of Cu3Si and TiC originated from the reaction between Ti3SiC2 and Cu, which was induced by the presence of Cu and the de-intercalation of Si atoms Ti3SiC2. OM analysis showed that with the increase in the sintering temperature, the reaction between Ti3SiC2 and Cu was severe, leading to the Ti3SiC2 getting smaller and smaller. SEM measurements illustrated that the uniformity of the microstructure distribution of the composites was restricted by the agglomeration of Cu, controlling the mechanical behaviors of the composites. At 1000 °C, the distribution of Cu in the composites was relatively even; thus, the composites exhibited the highest density, relatively high hardness and compressive strength. The relationships of the temperature, the current and the axial dimension with the time during the sintering process were further discussed. Additionally, a schematic illustration was proposed to explain the related sintering characteristic of the composites sintered by SPS. The as-synthesized Ti3SiC2/Cu composites were expected to improve the wear resistance of polycrystalline Ti3SiC2.

The fabrication of the electrically conductive Ti3SiC2/Si3N4 ceramic composites

The fabrication and mechanical properties of Ti3SiC2/HAp ceramics composites

Study Of Electrical Conductivity Of Tic/Si3n4 Ceramic Composites

The study of mechanical properties of Ti3SiC2/Y TZP ceramics composites

Ysz-Tin Composites with Good Electrical and Mechanical Properties Prepared by Spark Plasma Sintering

Mechanical and electrical properties of 3Y‐TZP/TiSi2 composites sintered at different temperatures

Fabrication and Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Composites by SPS

Electrical and Dielectric Behaviors of Ti3SiC2∕hydroxyapatite Composites

Fabrication and mechanical evaluation of SiC–TiC nanocomposites by SPS

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Effect of temperature on the structure and mechanical properties of SiC–TiB2 composite ceramics by solid-phase spark plasma sintering

Fabrication of Si 3 N 4 ceramics with high thermal conductivity and flexural strength via novel two-step gas-pressure sintering

Fabrication And Mechanical Properties Of Al2o3-Ti3sic2 Composites By Sps

Electrical and Dielectric Behaviors of Ti3SiC2∕Yttria-stabilized Zirconia Composites

Fabrication and Mechanical Properties of HAp/Ti<sub>3</sub>SiC<sub>2</sub> (60 vol.%) Composite by Sparkle Plasma Sintering

Preparation and properties of Ti3SiC2 preform reinforced SiC ceramic matrix composites

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Ti3SiC2-15 vol.%Cu Mixtures

Fabrication and Mechanical Properties of High-Pure Ti<sub>3</sub>SiC<sub>2</sub> Bulk Materials Directly by Hot-Pressing its Powder

Fabrication of W–1 Wt.% TiC Composites by Spark Plasma Sintering

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering