Abstract:A series of Pb(In[Formula: see text]Nb[Formula: see text]O3–Pb(Zn[Formula: see text]Nb[Formula: see text]O3–PbTiO3 (PIN–PZN–PT) ternary piezoelectric ceramics with compositions at the morphotropic phase boundary (MPB) were prepared. The phase structure, microstructure, electrical properties and temperature stability of PIN–PZN–PT ceramics were investigated systematically. The structural analysis indicated that an MPB phase consisting of rhombohedral and tetragonal phases was formed in all ceramics. For the selected compositions, dielectric measurements demonstrated that the Curie temperature [Formula: see text] changed from 237∘C to 295∘C and showed a strong trend of compositional dependence. All the samples showed good piezoelectic properties. Particularly, the 0.35PIN–0.40PZN–0.25PT sample has the optimum piezoelectric properties, the piezoelectric coefficient [Formula: see text] is 589 pC/N, the electromechanical coupling factors [Formula: see text] and [Formula: see text] are 59% and 49%, respectively. Compared with PZN–PT and PMN–PT ferroelectric crystals, the superior limit of usage temperature of PIN–PZN–PT ceramics was achieved around 230∘C by thermal depoling method. These results make PIN–PZN–PT ceramics a promising material to meet the practical demands of higher temperature and larger electric field operating ranges.

The Influence To The Dielectric Temperature Characteristic By Dopants In Two-Phase Complex Ceramic

New dielectric-temperature characteristics of BT and PMN cofired ceramics

Influence of sintering temperature on giant dielectric property of CaCu3Ti4O12

Ferroelectric Phase Transition and Electrical Properties of High-Tc PMN-PH-PT Ceramics Prepared by Partial Oxalate Route

Effect of Wo3 Doping on Dielectric Temperature Characteristics of Lead Complex Perovskite Ferroelectric Ceramics

Sintering and compositional dependencies of dielectric properties in PMW–PT–PNN ceramics

Investigation on Microscopic Mechanisms of High-Curie Temperature PMN-PH-PT Piezoelectric Ceramics

Design Morphotropic Phase Boundary Composition in the Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTio3 System and Its Performance

Enhanced electrical properties in low-temperature sintering PNN – PMW –PZT ceramics by Yb2O3 doping

Temperature-dependent Dielectric and Energy-Storage Properties of Pb(Zr,Sn,Ti)O3 Antiferroelectric Bulk Ceramics

Temperature-stable dielectric ceramics in Pb(Mg1/3Nb2/3)O3–CaTiO3–Bi4Ti3O12 pseudo-ternary system

Influences of Nanometer Inhomogeneity on the Phase Transition & Ptc Effect in Doped Batio3 Ferroelectric Ceramics

High Stability Of Dielectric Permittivity For Pb(Mg1/3nb2/3)O-3-Based Composite Ceramics Prepared By Coating Method

Effects of Sintering Temperature and Bi2O3, Y2O3 and MgO Co-Doping on the Dielectric Properties of X8R BaTiO3-based Ceramics

High Stability of Dielectric Permittivity for Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-Based Composite Ceramics Prepared by Coating Method

Effects of sintering temperature on dielectric and piezoelectric properties of PMN-PT ceramics

Influence of doping mode on phase structure and electrical properties of antiferroelectric ceramics

Effect of sintering process on dielectric properties of B2O3-doped graded ceramics

Structure, Electrical Properties and Temperature Stability of PIN–PZN–PT Piezoelectric Ceramics with Morphotropic Phase Boundary Compositions

EFFECT OF DOPING CaO ON DIELECTRIC PROPERTIES OF BaZr0.05Ti0.95O3 CERAMICS

Effect of Sintering Temperature on the Electric Properties of 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 Ceramics