Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Sensor enabled closed-loop bending control of soft beams

Electromechanical Model-Based Adaptive Control of Multilayered Dielectric Elastomer Bending Actuator

Multiflexoelectric Actuation and Control of Beams

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

Active Control on Coupled Bending-Torsion Vibration of Two-Link Space Flexible Component

Fabrication and Dynamic Modeling of Bidirectional Bending Soft Actuator Integrated with Optical Waveguide Curvature Sensor

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control

Parameter Identification and Model-Based Nonlinear Robust Control of Fluidic Soft Bending Actuators

Programmable soft bending actuators with auxetic metamaterials

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

Dual Photo- and Magneto-Responses of Layered Beams Composed of Liquid Crystal Elastomers and Magnetic Responsive Elastomers

Controlling bending deformation of a shape memory alloy-based soft planar gripper to grip deformable objects

Active control of dynamic response of an adaptive beam: Modeling and experiments

A Three-Chambed Soft Actuator Module with Omnidirectional Bending Motion

Bending behavior of biomimetic scale covered beam with tunable stiffness scales

Dynamic Modeling and Active Vibration Control of Cantilever Beam with Piezoelectrics