Abstract:Electrostrictive materials, hard ceramics and soft polymers, have been used as precision actuators in many engineering applications. This study is to examine bang–bang control performance of a hybrid Plexiglas beam laminated with polymeric electrostrictive (RTV 270) actuator and piezoelectric polyvinylidene fluoride (PVDF) sensor layers using both analytical and experimental techniques. Material characteristics are calibrated via static testing first; a hybrid beam model is then fabricated and an experiment set-up, consisting of a bang–bang controller, high-voltage amplifier, data acquisition system and the hybrid beam system, is designed to evaluate vibration control characteristics (i.e., damping ratio estimation) of the hybrid beam subjected to various control conditions. Due to the quadratic behaviour of electrostrictive materials, the controller activates the electrostrictive actuator only in upward motion of the beam, with reference to signals generated from the piezoelectric sensor. Base on constitutive equations and dynamic/control characteristics, a mathematic hybrid beam model is also derived from the electrostrictive thin shell theory and its dynamic responses, based on the finite difference discretization, are simulated to predict damping ratios resulting from control forces induced by the electrostrictive actuators. Dynamic responses (with and without control) of the physical beam model are measured and compared with simulation results. Favourable comparison suggests that the mathematical model describes the experimental model very well and its application to other advanced structures can be proceeded.

Dynamic Modeling and Active Vibration Control of Cantilever Beam with Piezoelectrics

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Modeling and vibration control of a flexible structure using linearized piezoeeramic actuators

Active vibration optimal control of piezoelectric cantilever beam with uncertainties

Active Vibration Control of A Flexible Beam Using A Non-Collocated Acceleration Sensor and Piezoelectric Patch Actuator

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Adaptive Vibration Control of Micro-Cantilever Beam with Piezoelectric Actuator in MEMS

Vibration Control and Dynamical Model of a Thermal-Electrical-Mechanical Coupled Smart Cantilevered Beam

Adaptive Vibration Control of Micro-Cantilever Beam in MEMS

Optimal Control of a Beam with Discontinuously Distributed Piezoelectric Sensors and Actuators

Multiflexoelectric Actuation and Control of Beams

A new finite element model for piezothermoelastic composite beam

Active vibration control of a piezoelectric bonded smart cantilever beam using fuzzy logic

Active Vibration Control of Cantilever Beam in fast Maneuvering Flight Environment

A Compact Piezoelectric Stack Actuator and Its Simulation in Vibration Control

Active control of nonlinear forced vibration in a flexible beam using piezoelectric material

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control

Mode Control of Vibration in Piezoelectric Cantilever Beam

Two Algorithms For Active Vibration Control Of A Flexible Cantilever Beam

Hybrid Feedback PID-FxLMS Algorithm for Active Vibration Control of Cantilever Beam with Piezoelectric Stack Actuator