Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Optimal Configuration of Sensors and Actuators for Vibration Control of Cantilever Plate

Active vibration control of a cantilever beam based on neural network online identification

Active vibration optimal control of piezoelectric cantilever beam with uncertainties

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Mode Control of Vibration in Piezoelectric Cantilever Beam

Optimal Control of a Beam with Discontinuously Distributed Piezoelectric Sensors and Actuators

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs | Optymalne sterowanie drganiami powłok stożkowych za pomoca{ogonek} spiralnego skolokowanego układu czujnika i elementu wykonawczego

Active Vibration Control of Composite Cantilever Beams

Optimum disposition of sensor/actuator for active vibration control of flexible structure

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

State-Space Modeling and Active Vibration Control of Smart Flexible Cantilever Beam with the Use of Finite Element Method

Multiflexoelectric Actuation and Control of Beams

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Optimal Disposition of Sensors/Actuators for Flexible Structure with Close Modes

Vibration Control Analysis of a Smart Flexible Cantilever Beam Using Smart Material

A Hybrid Photovoltaic/flexoelectric Actuation Mechanism Applied to Precision Actuation and Vibration Control of Beams

Vibration suppression of a beam using variable structure control with disturbance observer

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs