Investigation of facet-dependent performance of α-Fe 2 O 3 nanocrystals for heavy metals determination by atripping voltammetry

Wei-Hong Xu,Qiang-Qiang Meng,Chao Gao,Jing Wang,Qun-Xiang Li,Jin-Huai Liu,Xing-Jiu Huang

2014-01-01

Abstract:EXPERIMENTAL SECTION Chemical. All chemicals used were of analytical grade and were used as received without any further purification. All chemicals were purchased from Sinopharm Chemical Reagent Co., Ltd. (China). Acetate buffer solutions of 0.1 M with pH 5 were prepared by mixing stock solutions of 0.1 M acetic acid (HAc) and sodium acetate (NaAc). Milli-Q water (18 MΩ cm in resistivity, Millipore Corporation) was used throughout the experiment. Apparatus. The scanning electron microscopy (SEM) images were taken by a FEI Quanta 200 FEG field emission scanning electron microscope. The TEM and HRTEM images analyses were carried out on a JEM-2010 microscope. XRD was performed on a D/MaxIIIA X-ray diffractometer (Rigaku Co., Japan), using Cu Kа (λKа=1.5418 Å) as the radiation source. The nitrogen adsorption and desorption isotherms at 77 K were measured with a Micromeritics ASAP 2020 M analyzer. The Brunauer, Emmett, and Teller (BET) equation was used to obtain the specific surface areas. The Pb2+ concentrations were determined in the liquid phase using inductively coupled plasma atomic emission spectrometry (ICP-AES, Jarrell-Ash model ICAP 9000). Electrochemical experiments were recorded using a CHI 660D computercontrolled potentiostat (ChenHua Instruments Co., Shanghai, China). A conventional three-electrode system consisted of a glassy carbon working electrode (GCE, 3 mm diameter), an Ag/AgCl as the reference electrode and a platinum wire as the counter electrode.