Abstract:Abstract: Adders are one of the most widely used digital components in digital integrated circuit design. With the advances in technology, the design that offers either high speed, low power consumption, less area, or a combination of them is designed. There are various processes performed by the digital circuits among which arithmetic operations are prominent. Three-operand binary adder is the basic functional unit to perform the modular arithmetic in various cryptography and pseudorandom bit generator (PRBG) algorithms. Carry save adder (CS3A) is the widely used technique to perform the three-operand addition. However, the ripple carry stage in the CS3A leads to a high propagation delay. Moreover, a parallel prefix two-operand adder such as Han-Carlson (HCA) can also be used for three-operand addition, significantly reducing the critical path delay at the cost of additional hardware. Hence, a new high-speed and area-efficient adder architecture is designed using pre-compute bitwise addition followed by carry prefix computation logic to perform the three-operand binary addition that consumes substantially less area, low power, and drastically reduces the adder delay. To design a faster computing system with less hardware we require some other architecture. The proposed architecture will reduce the area as well as the delay by replacing the Han-Carlson adder with the Ladner fisher adder in a Highspeed area-efficient three-operand binary adder. The proposed architecture is synthesized with the zynq-7000 library. The proposed architecture reduces the LUT count and delay by 20 and 0.4 nanoseconds respectively. By using these synthesis results, we noted the performance parameters like the number of LUTs and delay. We compared the adders in terms of LUTs (represents area) and delay value

Design of High Speed 5:2 Compressor for Fast Arithmetic Circuits

High Quality Multiplier Design Based on Improved Circuits

High-Speed (7,2) Compressor Using A Fast Carry-Generation Logic based on Sorting Network

Design of efficient binary multiplier architecture using hybrid compressor with FPGA implementation

A New High Compression Compressor for Large Multiplier

Design of a fast multiplier used in 32Kb/s ADPCM

Design and analysis of enhanced dadda multiplier using 5 : 2 compressors

A Novel Current Mode Approximate Multiplier Scheme Based on 4:2 and 5:2 Compressors with Low Power Consumption and High Speed in CNTFET Technology

Ultra-Fast, High-Performance 8x8 Approximate Multipliers by a New Multicolumn 3,3:2 Inexact Compressor and its Derivatives

FinFET-based Low-power Improved PDP 4:2 Approximate Compressor Design

Power-Area Efficient Serial IMPLY-based 4:2 Compressor Applied in Data-Intensive Applications

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

A Design and Implementation of Radix-4 Based Fast Multiplier on FPGA

Performance Analysis of High Speed and Low Power Binary Adders

Efficient Approximate Multiplier Based on a New 1-Gate Approximate Compressor

A fast and energy-efficient hybrid 4–2 compressor for multiplication in nanotechnology

Fast Processing Unit Design to Mulitplier Using Block Unit Counting

Design of Approximate Tree Multiplier Using Approximate Compressor for Image Processing Applications

Design of Delay Efficient Hybrid Adder for High Speed Applications

A delay efficient hybrid parallel prefix variable latency CSKA based multi-operand adder with optimized 5:2 compressor and skip logic

Design and Analysis of Approximate 4–2 Compressors for High-Accuracy Multipliers