Abstract:To study the impact of bus priority control (BPC) on traffic carbon emissions under the strategies of speed guidance, green extension (GE), and red truncation (RT), with consideration of the main influencing factors such as delay, stopping times, and speed, a combination optimization method was used to develop a bi-level optimization model for BPC. The optimal carbon-emission reductions of buses and social vehicles with different fuel types in the upstream section of the intersection and the intersection control area was the upper-level objective, and the optimal total passenger-delay reduction was the lower-level objective. The Gauss – Seidel iterative algorithm was used to solve the model. Finally, the model was applied to the analysis of calculation cases. The results indicated that after BPC was adopted under the guidance acceleration strategy, the reductions in the carbon emissions and total delay of passenger were optimal when the guidance speed was 38 km/h, i.e. 12.67% and 21.05%, respectively. Under the guidance acceleration and GE strategy, the reductions in the carbon emissions and total delay of passenger were optimal when the guidance speed was 39 km/h and the GE was 6 s, i.e. 27.49% and 38.62%, respectively. Under the guidance deceleration and RT strategy, the reductions in the carbon emissions and total delay of passenger were optimal when the guidance speed was 29 km/h and the RT was 6 s, i.e. 22.18% and 33.52%, respectively. The model reduced the carbon emissions and total delay of passenger in the upstream section of the intersection and the intersection control area to achieve the optimal overall traffic benefit for the intersection. Two bus signal priority control strategies – green extension and red truncation – were studied. Carbon emission and delay calculation methods under the bus priority control were developed. Considering carbon-emission reductions of buses and social vehicles with different fuel types under different working conditions. Three control methods were studied: guidance acceleration, guidance acceleration and green extension, and guidance deceleration and red truncation.

Effects of Dwelling Buses on Traffic Operations of Non-motor Vehicles at Stops in China

Delay model in two-lane traffic flow induced by buses

Optimizing the numbe r fo buses stopping at on-line stops under mxi ed traffic conditions

Impact Analysis of Traffic Factors on Urban Bus Bunching

Survival Analysis of Bus Running Time Near Bus-Stop Areas

Modeling level-of-safety for bus stops in China

Delay correction model for estimating bus emissions at signalized intersections based on vehicle specific power distributions

A bus stop spacing optimizing model based on discrete distribution demand

Prediction model of bus arrival time at signalized intersection using GPS data

Research on the multiroute probit-based public transit assignment model based on bus stop

Bus dwell time estimation and overtaking maneuvers analysis: A stochastic process approach

Method for Computing On-Line Bus Stop Capacity

Passenger Boarding and Alighting Times at Bus Stops

Impacts of bus holding strategy on the performance and pollutant emissions of a two-lane mixed traffic system

Estimation of crowding costs in bus based on contingent valuation method

Simulation Analysis of Green Wave Control on a Short Corridor Based on Non-Motor Vehicles and Buses

Passenger travel characteristics and bus operational states: a study based on IC card and GPS data in Yinchuan, China

Optimization model for bus priority control considering carbon emissions

Interfering Spatiotemporal Features and Causes of Bus Bunching using Empirical GPS Trajectory Data

Commuter Bus Operation Rules under Two Traffic Scenarios and Two Weather Conditions: Naturalistic Driving Study on Vehicle Speed and Clearance

Urban Customized Bus Design for Private Car Commuters