Abstract:Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

A progressive failure model for composite laminates with initial delamination under compressive loading

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Compressive Failure Analysis for Low Length-Width Ratio Composite Laminates with Embedded Delamination

An Extended Analytical Model for Predicting the Compressive Failure Behaviors of Composite Laminate with an Arbitrary Elliptical Delamination

Delamination Propagation and Compressive Strength Prediction of Laminated Composite

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

Tensile Progressive Damage and Compressive Postbuckling Analysis of Open-Hole Laminate Composites

An Analytical Model for Evaluating the Buckling, Delamination Propagation, and Failure Behaviors of Delaminated Composites under Uniaxial Compression

Analysis of Residual Compressive Strength of Composite Laminates with Delamination

Application of a delamination model to laminated composite structures

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

Damage Analysis and Experimental Study of Composite Structures with Initial Delamination

Parameter Studies and Evaluation Principles of Delamination Damage in Laminated Composites

A numerical model on compressive behavior of cfrp laminate with a designed delamination

A Damage Model Reflecting the Interaction Between Delamination and Intralaminar Crack for Failure Analysis of FRP Laminates

Progressive Damage Simulation of Open-Hole Composite Laminates under Compression Based on Different Failure Criteria

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Status of Numerical Simulation Methods for Delamination Damage of Composite Laminates

Progressive Damage Behavior of Composite L‐stiffened Structures with Initial Delamination Defects under Uniaxial Compression: Experimental and Numerical Investigations

Physically based failure analysis method for laminated composites

The Compressive Behavior of CFRP Laminates with Delamination of Different Shapes Using Numerical and Experimental Approaches