Abstract:The electrochemical biosensor with a well-aligned nanotube array structure has been developed for amperometric detection and quantitative determination on the basis of bioelectrocatalysis mechanism. The independent and free-standing titania nanotube array has been successfully fabricated through an electrochemical anodization process of titanium sheet precursor in a fluoride-containing electrolyte, which can act well as a suitable electrode material for the biosensor application due to its high surface area and superior biocompatibility. In view of a more feasible loading of enyzme probes in accessible tubular channels, nanotube morphologies have been promoted by expanding tube diameter from 60 to 110 nm and increasing tube length from 520 nm to above 920 rim when anodization process at voltage of 20 V in acidic aqueous electrolyte has been adjusted into that at 60 V in neutral ethylene glycol/glycerol electrolyte. The functionalization modification of the titania nanotube array has been sequentially achieved by filling highly-bioactive glucose oxidases into as-formed nanotubes and then electropolymerizing pyrrole monomer into conductive polypyrrole for an interfacial immobilization of these bioactive enzymes. Morphology & microstructure characterization, electrochemical properties and bioelectrocatalytic reactivities of composite electrodes have been fully investigated. Electrochemical impedance spectroscopy has been employed to investigate the electrical conductivity and capacitance analysis. The direct amperometric detection of hydrogen peroxide through a direct electro-reduction reaction can be well fulfilled on bare titania nanotube array with a detection limit up to 2.0x10(-4) mM for ordinary nanotubes and 2.2x10(-4) mM for long nanotubes. A nano-array biosensor based oil the glucose oxidase-titania/titanium composite electrodes have been assembled in a conventional three-electrode system for amperometric detection and quantitative determination of glucose concentration in a pH 6.8 phosphate buffer solution at a potentiostatic condition of -0.4 V vs. the saturated calomel electrode. The glucose oxidase biosensor with a well-constructed nanotube array structure show an excellent performance with a high detection sensitivity of 45.5 mu A mM(-1) cm(-2), a fast responding time of 5.6 s and a very low detection limit of 2.0x10(-3) mM. A good operational reliability has also been achieved with a relative standard deviation below 3.0%. Such a well-designed biosensor with a desired nanotube array structure can consequentially contribute to the potential application of molecule detection and quantitative determination.

Author ' s personal copy TiO 2 nanotube arrays fabricated by anodization in different electrolytes for biosensing

Tio2 Nanotube Arrays Fabricated by Anodization in Different Electrolytes for Biosensing

Nanostructured Electrode with Titania Nanotube Arrays: Fabrication, Electrochemical Properties, and Applications for Biosensing.

Construction Of Nano-Array Electrode Material For Amperometric Detection Application

Carbon Monoxide Annealed TiO2nanotube Array Electrodes for Efficient Biosensor Applications

Titanium Dioxide Nanotube Arrays for Sensitive and Reliable Photoelectrochemical Sensors

A Review on TiO 2 Nanotube Arrays: Fabrication, Properties, and Sensing Applications

Anodic Fabrication of Highly Ordered ${\rm TiO}_{2}$ Nanotube Arrays and Its Hydrogen Sensing

Effect of Surface Defects on Biosensing Properties of TiO2 Nanotube Arrays

Coadsorption of Horseradish Peroxidase with Thionine on TiO2 Nanotubes for Biosensing

Electrochemical Fabrication of Titania Nanotube Arrays with Tunning Nature of Dimethyl Sulfoxide and Its Application for Hydrogen Sensing

Bioelectrocatalytic Application of Titania Nanotube Array for Molecule Detection

Electrode reaction and impedance resistance of TiO2 nanotube arrays prepared by anodic oxidation

Cyclic voltammetry studies of TiO2 nanotube arrays electrode: Conductivity and reactivity in the presence of H+ and aqueous redox systems

Fabrication and Hydrogen Sensing Properties of Titania Nanotubes

Electrochemical Performance and Biosensor Application of TiO2nanotube Arrays with Mesoporous Structures Constructed by Chemical Etching

Electroless Deposition of BaTiO3 Nanocubes for Electrochemical Sensing

Fabrication of Titanium dioxide nanotube photo-electrodes in different electrolyte mixtures and the impacts on their characteristics and photo-catalytic abilities under visible light

Photoelectrochemical Characterization of Hydrogenated TiO2 Nanotubes As Photoanodes for Sensing Applications.

Ti/TiO2Nanotube Array/Ni Composite Electrodes for Nonenzymatic Amperometric Glucose Sensing

A Ph Sensor Based on the TiO2 Nanotube Array Modified Ti Electrode