Abstract:Using fly ash as the modifier, blast furnace slag was modified to prepare slag wool, fulfilling the goal of using one type of waste to make use of another type of waste, and it is of great significance for the comprehensive utilization of industrial bulk solid wastes and resource recycling. In the process of forming fiber from blast furnace slag, fluidity is the key factor affecting the smooth formation of fiber from slag. To explore the changes in the fluidity of modified blast furnace slag, the temperature-dependent viscosity of modified blast furnace slag with different amounts of fly ash added was measured, and the effects of fly ash addition on the viscosity, fluidity, and activation energy of particle migration, and slag structure of modified blast furnace slag were investigated. The results indicated that with the increase in the amount of fly ash added, in the high-temperature region (>1324 °C), the viscosity of modified blast furnace slag increases gradually, the fluidity decreases gradually (i.e., the fluidity becomes worse), and the suitable fiber-forming temperature range gradually widens. When the fly ash addition increases from 5% to 25%, the trend of the activation energy of slag particle migration is as follows: increase, decrease, increase significantly, decrease. When the addition of fly ash is less than 20%, the SiO2 content and slag temperature jointly affect the breakage and reorganization of oxygen bridge bonding in the silicon-oxygen tetrahedron in the slag structure. When the addition of fly ash increases to 25%, the slag temperature dominates the breakage of oxygen bridge bonding in the silicon-oxygen tetrahedron in the slag structure. When using fly ash as the modifier to prepare slag wool, from the perspective of slag fluidity and process operability, the optimum addition amount of fly ash is 15%.

Fundamental Research and Applications of Blast Furnace Slag

The viscosity, crystallization behavior and glass-ceramics preparation of blast furnace slag: A review

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Blast Furnace Slag Formation Prediction Model Using Classical Thermodynamics

Computational Study of Hot Gas Injection (HGI) into an Ironmaking Blast Furnace (BF)

Prediction on particle size characteristics of high-temperature liquid blast furnace slag in a centrifugal granulation process

Influence of TiO2, Al2O3, and Basicity on Viscosity and Structure of High Titanium-Bearing Blast Furnace Slag

Preparation of Slag Wool by Integrated Waste-Heat Recovery and Resource Recycling of Molten Blast Furnace Slags: From Fundamental to Industrial Application

Optimization of high alumina slag practice in blast furnace ironmaking: an industrial approach (PART 1: fundamental aspects)

Reasonable compositions of BF slag in Laiwu Steel

Influence Of Tio2 And Basicity On Viscosity Of Ti Bearing Slag

Experimental Research and Prediction Model on Viscosity of High FeO Content Slag

Effect of Oily Sludge Treatment with Molten Blast Furnace Slag on the Mineral Phase Reconstruction of Water-Quenched Slag Properties

Influence of Fly Ash on the Fluidity of Blast Furnace Slag for the Preparation of Slag Wool

Research status of centrifugal granulation, physical heat recovery and resource utilization of blast furnace slags

Cooling and phase evolution of a molten blast furnace slag particle

Study on the High-temperature Properties of High-titania Slags produced with Cr-bearing Vanadia-titania Magnetite Smelting in Blast Furnace

Numerical Simulation of the Interaction Between Arc Plasma and Molten Slag in Electric Arc Furnace for High-Titania Slag Smelting

Melting–Dropping Property of Blast Furnace Charge on the Basis of its Slag Formation Behavior

Effect of B 2 O 3 on the Structure and Viscous Behavior of Ti-Bearing Blast Furnace Slags