Abstract:To study the flexural behavior of prestressed concrete beams with high-strength steel reinforcement and high-strength concrete and improve the crack width calculation method for flexural components with such reinforcement and concrete, 12 specimens were tested under static loading. The failure modes, flexural strength, ductility, and crack width of the specimens were analyzed. The results show that the failure mode of the test beams was similar to that of the beams with normal reinforced concrete. A brittle failure did not occur in the specimens. To further understand the working mechanism, the results of other experimental studies were collected and discussed. The results show that the normalized reinforcement ratio has a greater effect on the ductility than the concrete strength. The cracking- and peak-moment formulas in the code for the design of concrete (GB 50010-2010) applied to the beams were both found to be acceptable. However, the calculation results of the maximum crack width following GB 50010-2010 and EN 1992-1-1:2004 were considerably conservative. In the context of GB 50010-2010, a revised formula for the crack width is proposed with modifications to two major factors: the average crack spacing and an amplification coefficient of the maximum crack width to the average spacing. The mean value of the ratio of the maximum crack width among the 12 test results and the relative calculation results from the revised formula is 1.017, which is better than the calculation result from GB 50010-2010. Therefore, the new formula calculates the crack width more accurately in high-strength concrete and high-strength steel reinforcement members. Finally, finite element models were established using ADINA software and validated based on the test results. This study provides an important reference for the development of high-strength concrete and high-strength steel reinforcement structures.

Cracking behavior and crack width predictions of concrete beams prestressed with bonded frp tendons

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Crack width of reinforced concrete beams strengthened with CFRP sheets

Flexural capacity of concrete beams prestressed with carbon fiber reinforced polymer (CFRP) tendons

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Fracturing behaviors of FRP-strengthened concrete structures

Ductility and Cracking Behavior of Prestressed Concrete Beams Strengthened with Prestressed CFRP Sheets

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Predicting deflection of retrofitted reinforced concrete beams

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

Behavior of Pre-Cracked Reinforced Concrete Beam Strengthened with Prestressed CFRP Plate

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Long-term mechanical behaviors of uncracked concrete beams prestressed with external basalt fiber-reinforced polymer tendons

Investigation on Intermediate Crack Induced Debonding Failure of FRP Laminates in Flexurally FRP-Strengthened RC Beams

Study on Prestressed Concrete Beams Strengthened with External Unbonded CFRP Tendons

Flexural Behavior and Cracks in Concrete Beams Reinforced with GFRP Bars