Abstract:Emittance exchange (EEX) provides a novel tool to enhance the phase space manipulation techniques. This study presents a beamline design for exchanging the transverse and longitudinal emittance of an electron bunch based on the Tsinghua Thomson scattering experimental facility. This beamline consists of a 2.856 GHz half-one-half cell deflecting cavity with no axis offset and two doglegs. In this paper, by optimizing the beam envelope parameters for Tsinghua Thomson scattering source, we report the theoretical analysis and a good particle tracking simulation result about emittance exchange and longitudinal shaping. INTRODUCTION Since the emittance exchange (EEX) concept was firstly came up with in 2002 [1], lots of researches have been developed to optimize the exchange result for different applications. Theoretical analysis for identical dogleg-type exchanger presented an exact result contrast to chicane-type in 2006 [2]. A proof-of-principle transverse and longitudinal emittance exchange experiment conducted at Fermi Lab demonstrates the feasibility of EEX theory [3]. Although the initial motivation for EEX aims to attain an optimized transverse emittance for FEL, a significant innovation proposed in [2] and [4] which provide a novel tool for advanced phase space manipulation really extends the application of EEX and incites a new term research in bunch shaping for many kinds of accelerators. In the wakefield acceleration, a short and low energy but high current drive beam can create high gradient fields to accelerate trailing bunch. A novel shaped drive bunch to enhance the transformer ration which can extremely increase the acceleration efficiency has been proposed in Argonne AWA group based on EEX [5]. Now the experiment to achieve this specific shaped bunch is being conducted at Argonne. A similar beam shaping using emittance exchanger is presented in LANL [6]. Tsinghua University has been constructed a Thomson Scattering X-ray (TTX) beamline in 2009 [7], which aims at an ultra-fast, high flux, and tuneable X-ray source for advanced imaging applications. Based on this experimental facility, we design an EEX beamline to use RF deflecting cavity for bunch longitudinal shaping. Whether to shape electron bunch for wakefield accelerator or for tuneable subpicosecond electron bunch train generation [8], this EEX technique can be the spectacular tool in accelerator physics. This paper is organised in three parts, firstly we report the theoretical design of EEX beamline based on TTX, and secondly we introduce the half-one-half deflecting cavity designed for EEX, finally the particle tracking simulation of emittance exchange and bunch shaping using this beamline is presented. ANALYTIC TRANSFER MATRIX Generally, two identical doglegs sperated by a deflecting cavity consist the main components of EEX beamline. The transfer matrix of dogleg and deflecting cavity in first order can be written as 2 1 / 2 0 1 2 0 0 1 0 0 1 0 0 , 0 0 1 0 0 1 2 / 2 / 1 0 0 0 1 C C DL

Matrix Approach to Decouple Transverse-Coupled Beams

Decoupling a Transversely-Coupled Beam Based on Symplectic Transformation Theory and Its Application

Transverse emittance dilution due to coupler kicks in linear accelerators

Theorems on Transverse-Longitudinal Coupling-Based Bunch Compression and Harmonic Generation Schemes

Design approach for modern high-current, radio-frequency quadrupole accelerators with low emittance transfer

Suppression of Coherent Synchrotron Radiation-Induced Emittance Growth in a Multi-Bend Deflection Line

Experimental Study of Synchro-Betatron Coupling Induced by Dipole Modulation

Emittance exchange beamline design in thu acc lab

Uncoupled achromatic condition of a dog-leg system with the presence of RF cavities

Periodic four-dimensional solution for transport of intense and coupled coasting beams through quadrupole channels

Low-Cost Beam Steering That Covers the Entire Azimuthal Plane Powered by Amplitude-Only Synthesis of a Quintuple-Dipole Source

Cancellation of RF Coupler-Induced Emittance Due to Astigmatism

General design approach and practical realization of decoupling matrices for parallel transmission coils

Beam-dynamics Design of a 2 MeV/u Heavy-Ion IH-DTL with Electromagnetic Quadrupole Structure

Halo Coupling and Cleaning by a Space Charge Resonance in High Intensity Beams

Periodic solution for transport of intense and coupled coasting beams through quadrupole channels

Beam dynamics design and error study of the coupled structure with ladder RFQ and IH-DTL

Coupler RF kick and emittance optimization of the SHINE injector

The Beam Mismatches in the RFQ Dynamics Design

Preparation of an emittance transfer experiment