Abstract:The exploitation of geothermal energy commonly occurs at depths ranging from 3000 to 10000 m. At these depths, the surrounding rocks experience substantial temperature and pressure, leading to alterations in their physical and mechanical properties. The infiltration of drilling fluid into the wellbore result in thermal exchange with the surrounding rocks, causing a decrease in their strength and stability. Consequently, the wellbore becomes more susceptible to instabilities. This objective of this study was to investigate the physical and mechanical properties of heated granite under three distinct cooling methods: liquid nitrogen cooling, water cooling, and natural cooling. Based on experimental findings, this study enhanced the failure criteria for high-temperature granite and established a thermal-solid coupling model to assess the stability of wellbores in high-temperature granite formations. To examine the impacts of temperature variations between the wellbore and drilling fluid, analyze the stress distribution around the wellbore at various depths, and evaluate the consequences of high-temperature fluid intrusion on wellbore stability. The research indicates that: (1) Under identical high-temperature conditions, it has been observed that liquid nitrogen cooling causes the most significant damage to granite, followed by water cooling. On the other hand, natural cooling has the least detrimental effect on the rock. (2) With increasing temperature, the physical and mechanical properties of the rock undergo two distinct stages of change. The first stage is a gradual variation that occurs between 25 and 400 °C, while the second stage is a rapid variation observed between 400 and 800 °C. Notably, the temperature of 400 °C serves as a critical threshold for the observed property changes in this granite. (3) The rock failure criteria have been modified based on the thermal damage characteristics of cold fluid intrusion into granite and a thermal-hydraulic-mechanical coupled wellbore model has been established. (4) The numerical simulation results revealed that liquid nitrogen cooling had the greatest impact on wellbore temperature, stress, and damage zone. At 500 s, the temperature on the wellbore surface decreased by approximately 700 °C due to liquid nitrogen cooling. The circumferential stress and radial stress decreased by 180 MPa and 35 MPa, respectively. (5) After the intrusion of cold fluid into high-temperature granite, the stress around the wellbore decreases and the rate of decrease in circumferential stress is significantly greater than that of radial stress. This will increase the likelihood of wellbore instability.

The effect of thermoelastic stress change in the near wellbore region on hydraulic fracture growth

Modeling the impact of thermal stresses induced by wellbore cooldown on the breakdown pressure and geometry of a hydraulic fracture

Analysis of Thermal Effects on Hydraulic Fracturing Near a Horizontal Well by Using Displacement Discontinuity Method

Combined Effects of Thermal Perturbation and In-situ Stress on Heat Transfer in Fractured Geothermal Reservoirs

Effect of water-cooling shock on fracture initiation and morphology of high-temperature granite: Application of hydraulic fracturing to enhanced geothermal systems

A Numerical Simulation of High-Temperature Rock Hydraulic Fracturing Based on Coupled Thermo-Mechanical Peridynamics

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage

Experimental comparison of mechanical properties and fractal characteristics of geothermal reservoir rocks after different cooling treatments

Deflection of Hydraulic Fractures and Shear Stress Disturbance Considering Thermal Effects: A Numerical Case Study

Study on the cracking mechanism of hydraulic and supercritical CO2 fracturing in hot dry rock under thermal stress

Experimental and numerical simulation research on hot dry rock wellbore stability under different cooling methods

Numerical simulation of fracture temperature field distribution during oil and gas reservoir hydraulic fracturing based on unsteady wellbore temperature field model

Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach

Study on frost heaving force and the propagation of cracks in freezing rocks using the phase field method

Numerical simulation on hydraulic fracture propagation in laminated shale based on thermo-hydro-mechanical-damage coupling model

Phase-Field Modeling of Thermal Fracture and Shear Heating in Rocks with Degraded Thermal Conductivity Across Crack

Use of Extended Finite Element Method to Characterize Stress Interference Caused by Nonuniform Stress Distribution during Hydraulic Fracturing

Modeling of fracture geometry alteration and fracture flow evolution under geostress and water-rock interaction

Numerical Investigation into the Distributions of Temperature and Stress around Wellbore during the Injection of Cryogenic Liquid Nitrogen into Hot Dry Rock Reservoir

Coupled Thermal-Hydraulic-Mechanical Modeling of Near-Well Stress Evolution in Naturally Fractured Formations during Drilling

Study of the Heat Transfer in the Wellbore During Acid/Hydraulic Fracturing Using a Semianalytical Transient Model