Abstract:The exploitation of geothermal energy commonly occurs at depths ranging from 3000 to 10000 m. At these depths, the surrounding rocks experience substantial temperature and pressure, leading to alterations in their physical and mechanical properties. The infiltration of drilling fluid into the wellbore result in thermal exchange with the surrounding rocks, causing a decrease in their strength and stability. Consequently, the wellbore becomes more susceptible to instabilities. This objective of this study was to investigate the physical and mechanical properties of heated granite under three distinct cooling methods: liquid nitrogen cooling, water cooling, and natural cooling. Based on experimental findings, this study enhanced the failure criteria for high-temperature granite and established a thermal-solid coupling model to assess the stability of wellbores in high-temperature granite formations. To examine the impacts of temperature variations between the wellbore and drilling fluid, analyze the stress distribution around the wellbore at various depths, and evaluate the consequences of high-temperature fluid intrusion on wellbore stability. The research indicates that: (1) Under identical high-temperature conditions, it has been observed that liquid nitrogen cooling causes the most significant damage to granite, followed by water cooling. On the other hand, natural cooling has the least detrimental effect on the rock. (2) With increasing temperature, the physical and mechanical properties of the rock undergo two distinct stages of change. The first stage is a gradual variation that occurs between 25 and 400 °C, while the second stage is a rapid variation observed between 400 and 800 °C. Notably, the temperature of 400 °C serves as a critical threshold for the observed property changes in this granite. (3) The rock failure criteria have been modified based on the thermal damage characteristics of cold fluid intrusion into granite and a thermal-hydraulic-mechanical coupled wellbore model has been established. (4) The numerical simulation results revealed that liquid nitrogen cooling had the greatest impact on wellbore temperature, stress, and damage zone. At 500 s, the temperature on the wellbore surface decreased by approximately 700 °C due to liquid nitrogen cooling. The circumferential stress and radial stress decreased by 180 MPa and 35 MPa, respectively. (5) After the intrusion of cold fluid into high-temperature granite, the stress around the wellbore decreases and the rate of decrease in circumferential stress is significantly greater than that of radial stress. This will increase the likelihood of wellbore instability.

Numerical Investigation into the Distributions of Temperature and Stress around Wellbore during the Injection of Cryogenic Liquid Nitrogen into Hot Dry Rock Reservoir

Predicting the radial heat transfer in the wellbore of cryogenic nitrogen fracturing: Insights into stimulating underground reservoir

Numerical investigation on wellbore temperature and pressure during carbon dioxide fracturing

Investigation of Rock Mechanical Properties under Liquid Nitrogen Environment

Phase-field cohesive zone modeling of hydro-thermally induced fracture in hot dry rock during liquid nitrogen fracturing

Numerical investigation of wellbore temperature and pressure fields in CO2 fracturing

A review of liquid nitrogen fracturing technology

Microstructure Imaging and Characterization of Rocks Subjected to Liquid Nitrogen Cooling

Damage and Failure of Hot Dry Rock under Cyclic Liquid Nitrogen Cold Shock Treatment: A Non-destructive Ultrasonic Test Method

Cryogenic Fracture Proliferation from Boreholes under Stresses

Modeling of cryogenic cracking behavior of tight sandstone under confinement

Computational Fluid Dynamics Modeling and Analysis of Axial and Radial Temperature of Wellbore during Injection and Production Process

Simulation of wellbore temperature and pressure field in supercritical carbon dioxide fracturing

Coupled simulations on fracture network evolution during nitrogen fracturing after liquid nitrogen pre-conditioning in shale

Experimental and numerical simulation research on hot dry rock wellbore stability under different cooling methods

Variations in Stress Thresholds for Heated Granite Subjected to Rapid Cooling under Different Confining Pressures

Experimental investigation of shale breakdown pressure under liquid nitrogen pre-conditioning before nitrogen fracturing

Numerical simulation of fracture temperature field distribution during oil and gas reservoir hydraulic fracturing based on unsteady wellbore temperature field model

Core-scale Investigation of Convective Heat Transfer of Supercritical Pressure CO2 in Hot Rock Fracture with Various Inclinations

Damage Evaluation and Statistic Constitutive Model of High-Temperature Granites Subjected to Liquid Nitrogen Cold Shock

Modeling the impact of thermal stresses induced by wellbore cooldown on the breakdown pressure and geometry of a hydraulic fracture