Abstract:Given the current lack of research data on the delamination behavior of spread-tow woven composites, this study aims to systematically characterize the mode-I interlaminar fracture behavior of plain weave spread-tow fabrics (STFs) composites. DCB tests were conducted to investigate the influence of different ply thicknesses, unit cell sizes, and interface angles on delamination behavior and fiber bridging. The experimental results revealed a stick–slip crack propagation behavior in mode-I delamination of studied material, and a detailed analysis was performed on the influence mechanism of unit cell size on this behavior. Fiber bridging was found to be the primary mechanism responsible for the increased interlaminar fracture toughness in the plain weave STFs composites. Fractography analysis indicated that regions rich in fibers and resin in thicker-ply laminates promote fiber bridging, while an interface angle inconsistent with the direction of crack propagation inhibits fiber bridging. The concept of average steady-state fracture toughness (average G s) was introduced as a means to assess propagation fracture toughness and two methods were proposed to obtain bridging tractions for characterizing the fiber bridging phenomenon. The bridging tractions and average G s were used as key parameters to establish a trilinear cohesive zone model (CZM) for simulating mode-I delamination. The numerical results aligned well with the experimental results, demonstrating the applicability of the parameter determination strategy based on the average G s and bridging tractions for the selection of parameters to use in the CZM.

Experimental Study of Deformation Field Around the Matrix Crack Induced by Fiber Bundles Using DGS Method

Experimental study on the matrix crack-fiber interaction using photoelasticity method

Study on the Effect of Inclusion Shape on Crack-Inclusion Interaction Using Digital Gradient Sensing Method

Caustic Investigation of Dynamic Interactions Between Propagating Matrix Crack and Modified Fibre Bundles

Study on Crack-Inclusion Interaction Using Digital Gradient Sensing Method

Investigation of Dynamic Mode I Matrix Crack-Fiber Bundle Interaction in Composites Using Caustics

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Elastic-Plastic Fracture Behavior Analysis On A Griffith Crack In The Cylindrical Three-Phase Composites With Generalized Irwin Model

Experimental study on interaction between matrix crack and fiber bundles using optical caustic method

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Evaluation of Carbon Fiber/epoxy Interfacial Strength in Transverse Fiber Bundle Composite: Experiment and Multiscale Failure Modeling

Estimation of Aramid Fiber/epoxy Interfacial Properties by Fiber Bundle Tests and Multiscale Modeling Considering the Fiber Skin/core Structure

Micromechanical transverse tensile crack propagation of unidirectional fiber reinforced epoxy SMC slice imbedded in a TDCB specimen

Effect of Multiple Matrix Cracking on Crack Bridging of Fiber Reinforced Engineered Cementitious Composite

Real-Time Observation of Damage Nucleation in Three-Dimensionally Reinforced Carbon/Carbon Composites and Role of Bundle/Matrix Interface

Crack Kinking and Tunneling Simulation for the Single-Fiber Composite under Transverse Tension Based on Phase-Field Method

Study of Cracked Unidirectional Glass Fiber-reinforced Composites by Digital Speckle Correlation Method

Prediction of overall tension behavior of short fiber-reinforced composites

Multiple Cracking of Fiber/Matrix Composites - Analysis of Normal Extension

A Zener–Stroh Crack in Fiber-Reinforced Composites with Generalized Irwin Plastic Zone Correction

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites