Abstract:Usually premixed flame propagation and laminar burning velocity are studied for mixtures at normal or elevated temperatures and pressures, under which the ignition delay time of the premixture is much larger than the flame resistance time. However, in spark-ignition engines and spark-assisted compression ignition engines, the end-gas in the front of premixed flame is at the state that autoignition might happen before the mixture is consumed by the premixed flame. In this study, laminar premixed flames propagating into an autoigniting dimethyl ether/air mixture are simulated considering detailed chemistry and transport. The emphasis is on the laminar burning velocity of autoigniting mixtures under engine-relevant conditions. Two types of premixed flames are considered: one is the premixed planar flame propagating into an autoigniting DME/air without confinement; and the other is premixed spherical flame propagating inside a closed chamber, for which four stages are identified. Due to the confinement, the unburned mixture is compressed to high temperature and pressure close to or under engine-relevant conditions. The laminar burning velocity is determined from the constant-volume propagating spherical flame method as well as PREMIX. The laminar burning velocities of autoigniting DME/air mixture at different temperatures, pressures, and autoignition progresses are obtained. It is shown that the first-stage and second-stage autoignition can significantly accelerate the flame propagation and thereby greatly increase the laminar burning velocity. When the first-stage autoignition occurs in the unburned mixture, the isentropic compression assumption does not hold and thereby the traditional method cannot be used to calculate the laminar burning velocity. A modified method without using the isentropic compression assumption is proposed. It is shown to work well for autoigniting mixtures. Besides, a power law correlation is obtained based on all the laminar burning velocity data. It works well for mixtures before autoignition while improvement is still needed for mixtures after autoignition.

Measurement of Laminar Flame Propagation Speed of 1-Pentene/Air Mixture

Measurement of Laminar Flame Speed and Chemical Kinetic Model of 1-Pentene/air Mixtures

Comparative Research on Laminar Flame Propagation for Four C8 Fuels

Measurement of Laminar Flame Speed of n-Propylbenzene/Air Premixed Flames

Flame Propagation of Mixtures of Air with High Molecular Weight Neat Hydrocarbons and Practical Jet and Diesel Fuels

Effect of Molecular Structure on Laminar Flame Speeds of Three C5 Alkenes

The Pressure Dependence of Laminar Flame Speed of 2-Methyl-2-butene/air Flames in the 0.1–1.0 MPa Range

Laminar Combustion Characteristics of Premixed Shale Gas and Air Flames

A case study on laminar flame propagation of flame synthesis precursors using spherically propagating flame: Tetramethylsilane and its alkane counterpart

Experimental and Kinetic Study on the Laminar Premixed Cyclopentene/air Flames

Laminar burning Velocities, Markstein numbers and cellular instability of spherically propagation Ethane/Hydrogen/Air premixed flames at elevated pressures

Laminar Flame Propagation of Atmospheric Iso-Cetane/air and Decalin/air Mixtures

Laminar Flame Characteristics of Cyclopentanone at Elevated Temperatures

On Laminar Premixed Flame Propagating into Autoigniting Mixtures under Engine-Relevant Conditions

Laminar Flame Speeds of C5 to C8 N-Alkanes at Elevated Pressures and Temperatures

Experimental determination of counterflow ignition temperatures and laminar flame speeds of C2–C3 hydrocarbons at atmospheric and elevated pressures

Experimental and numerical determination of laminar flame speeds: Mixtures of C2-hydrocarbons with oxygen and nitrogen

Study of the Sec-Butanol-Air Premixed Laminar Flame Speed

Laminar Flame Speeds of Lean High-Hydrogen Syngas at Normal and Elevated Pressures

Laminar Flame Speed of Methane/Air at Engine-Relevant Conditions: Performance of Different Mechanisms

Analysis of Methyl Pentanoate/air Mixtures Spherically Expanding Flame Intrinsic Instabilities