Abstract:The uncertainty on the laminar flame speed extracted from spherically expanding flames can be minimized by using large flame radius data for the extrapolation to zero stretch-rate. However, at large radii, the hydrodynamic and thermo-diffusive instabilities induce the formation of a complex cellular flame front and limit the range of usable data. In the present study, we have employed the flame stability theory of Matalon to optimize the properties of the initial mixture so that transition to cellularity may occur at a pre-determined, large radius. This approach was employed to measure the laminar flame speeds of H2/O2/N2/He mixtures with equivalence ratios from 0.6 to 2.0, at pressures of 50/80/100 kPa and a temperature of 300 K. For all the performed experiments, the uncertainty related to the extrapolation to zero stretch-rate (performed with the linear curvature model) was below 2% as shown by the position of the data points in the (Lb/R f ,U , Lb/R f ,L) plan, where Lb is the burned Markstein length; and R f ,L and R f ,U are the flame radii at the lower and upper bounds of the extrapolation range. Comparison of the predictions of four chemical mechanisms with the present unstretched laminar flame speed data indicated an error below 10% for most conditions. In addition, unsteady 1-D simulations performed with A-SURF demonstrated that the flame dynamical response to stretch rate could not be captured by the mechanisms. The present work indicates that although the stability theory of Matalon provides a well defined framework to optimize the mixture properties for improved flame speed measurement, the uncertainty of some of the required parameters can result in largely over-estimated critical radius for cellularity onset which compromise the accuracy of the optimization procedure.

Study of the Sec-Butanol-Air Premixed Laminar Flame Speed

Experiment on premixed laminar combustion of n-butanol

Measurement of Laminar Flame Speed of n-Propylbenzene/Air Premixed Flames

Comparative Research on Laminar Flame Propagation for Four C8 Fuels

Effect of multi-parameter coupling on sec-butanol laminar burning velocity

Laminar Combustion Characteristics of Premixed Shale Gas and Air Flames

Laminar flame speed studies of lean premixed H 2 /CO/air flames

Laminar Flame Characteristcs of Ethanol-Air Mixture: Experimental and Simulation Study

Effects of Compression and Stretch on the Determination of Laminar Flame Speeds Using Propagating Spherical Flames

Investigation of laminar flame speeds of CH 4 /O 2 /CO 2 mixtures at ordinary pressure and kinetic simulation

The Pressure Dependence of Laminar Flame Speed of 2-Methyl-2-butene/air Flames in the 0.1–1.0 MPa Range

An experimental and mechanistic study on the laminar flame speed, Markstein length and flame chemistry of the butanol isomers

Experimental and chemical kinetic study on the laminar flame characteristics of the blends of n-propanol and isooctane at elevated temperature and pressure

Laminar Flame Speeds of C5 to C8 N-Alkanes at Elevated Pressures and Temperatures

Optimizing Mixture Properties for Accurate Laminar Flame Speed Measurement from Spherically Expanding Flame: Application to H2/O2/N2/He Mixtures

Laminar Flame Speeds of Lean High-Hydrogen Syngas at Normal and Elevated Pressures

Laminar Flame Speed of Methane/Air at Engine-Relevant Conditions: Performance of Different Mechanisms

Laminar Flame Speeds of C5 to C8 N-Alkanes at Elevated Pressures: Experimental Determination, Fuel Similarity, and Stretch Sensitivity

Laminar burning Velocities, Markstein numbers and cellular instability of spherically propagation Ethane/Hydrogen/Air premixed flames at elevated pressures

On the Extraction of Laminar Flame Speed and Markstein Length from Outwardly Propagating Spherical Flames

Experimental Study on Laminar Flame Speeds of Dimethyl Ether and Air Mixtures