Abstract:Concrete filled carbon fiber reinforced polymer confined steel tube (CF-CFRP-ST) columns are having promising utilization in offshore structures such as tower columns of offshore fans and curved beam bridges, which are usually subjected to the combination of axial compressive loading and torsional loading. To reveal the compressive-torsional behaviour of square concrete filled CFRP-steel tube (S-CF-CFRP-ST), total 8 specimens were designed and tested under compressive-torsional load. Principal factors of test are the confinement factor of transverse CFRP, strengthening factor of longitudinal CFRP, axial compression ratio and the compressive strength of cubic concrete as principal factors. Based on the tests, a numerical simulation method is firstly proposed to estimate the compressive-torsional performance of S-CF-CFRP-ST, and then validated against the representative tests results, such as the failure modes, torque-rotation angle curves, and torque-shear strain curves. The test results reveal that the CFRP sheets are all under tension during loading and can cooperate well with steel tube as strains measured on CFRPs. The failure mode of S-CF-CFRP-ST belongs to ductile failure. Additionally, the compressive-torsional deformation of S-CF-CFRP-ST is in line with plane section assumption before the specimen gets into plastic stage. The good consistence between numerical results and experimental ones reveals that the proposed simulation method can predict the torsional behaviour of S-CF-CFRP-ST reasonably and accurately. Using this verified numerical models, parametric study is conducted to explore the influence of principle factors (e.g. CFPR layers, strength of concrete and steel, and steel ratio) on compressive-torsional behaviour of S-CF-CFRP-ST. It is found that the compressive-torsional bearing capacity of S-CF-CFRP-ST is slightly improved with the increase of CFRP layers and significantly affected by the strength of the used square steel tube. Additionally, the increase of steel ratio for CF-CFRP-ST member enhances not only the torsional strength but also the initial stiffness. Finally, an expression for calculation of torsional bearing capacity of S-CF-CFRP-ST is proposed based on the result of test and numerical simulation.

Numerical simulation of CFRP strengthened steel square hollow section (SHS) subject to torsion

Experimental Study on CFNRST Members under Combined Compression and Bending

Experimental study on torsional behaviour of square concrete filled CFRP-steel tube (S-CF-CFRP-ST)

Preliminary research on mechanical performance of concrete-filled rectangular steel tubular members under torsion

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Experimental and Numerical Study on Torsional Behaviour of Steel-Reinforced Concrete-Filled Square Steel Tubular Members

Experimental investigation of thin-walled centrifugal concrete-filled steel tubes under torsion

Torsional Behaviour of Concrete-Filled Circular Steel Tubular Members under Coupled Compression and Torsion

Study on compressive-torsional behaviour of square concrete filled CFRP-steel tube (S-CF-CFRP-ST)

Performance of Concrete-Filled Thin-Walled Steel Tubes under Pure Torsion

Study of the Behavior of Square Concrete-Filled CFRP Steel Tubular under a Bending-Torsion Load

Research on Torsion Behavior and Design Approach of Rectangular Concrete-filled Steel Tubular Members

Study on the working mechanism and behavior of centrifuge concrete filled-steel tubular(CCFT) members subjected to torsion

Investigation on Concrete Filled Double Skin Steel Tubes (cfdsts) under Pure Torsion

Torsional Behavior of Concrete-Filled Circular Steel Tubes Strengthened with CFRP

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Torsional capacity of concrete-filled steel tube columns circumferentially confined by CFRP

Experimental and theoretical analysis for centrifuge concrete filled-steel tubular members subjected to bending-torsion

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Experimental Behaviour of Reinforced Concrete-Filled Steel Tubes under Eccentric Tension

Research on mechanical behavior of concrete-filled steel tubular member with encased profiled steel under pure torsion