Abstract:Concrete-filled steel tubular (CFST) column may be undergone coupled compression and torsion during its service life, and therefore, six CFST specimens were tested to analyze the torsional behaviour. The failure modes, torsion moment (T) versus torsional angle (θ) relationships and torsion moment-strain curves derived from the testing results for CFST specimens under different torsion conditions were compared and analyzed. Meanwhile, the numerical model of CFST members was developed via the software ABAQUS to further analyze the torsional mechanism. Moreover, the comparison of torsional performance between CFST column and steel-reinforced concrete-filled steel tubular (SRCFST) column was conducted. The results indicated that the T-θ curve of each specimen showed slight difference in the initial stage under diverse loading conditions; however, the specimens under torsion after compression exhibited highest ultimate torsional capacity, followed by the specimens under simultaneous compression-torsion and pure torsion. The T-θ curve of SRCFST columns with I-section steel or cruciform steel was similar to that of CFST columns, but the T-θ curve of SRCFST columns increased obviously in the later stage due to the inserted steel tube. In addition, the validity of the numerical model was verified against experiment. Then, the interaction force between steel tube and concrete and the internal forces of the characteristic points of the T-θ curves under different loading conditions and axial load levels were compared to understand the stress mechanism. Finally, the proposed calculation method for torsional capacity of CFST members under coupled compression-torsion could provide a more accurate prediction.

Research on mechanical behavior of concrete-filled steel tubular member with encased profiled steel under pure torsion

Preliminary research on mechanical performance of concrete-filled rectangular steel tubular members under torsion

Flexural strength analysis of non-post-tensioned and post-tensioned concrete-filled circular steel tubes

Research on Torsion Behavior and Design Approach of Rectangular Concrete-filled Steel Tubular Members

Torsional Behaviour of Concrete-Filled Circular Steel Tubular Members under Coupled Compression and Torsion

Experimental and theoretical analysis for centrifuge concrete filled-steel tubular members subjected to bending-torsion

Study on the working mechanism and behavior of centrifuge concrete filled-steel tubular(CCFT) members subjected to torsion

Experimental and Numerical Study on Torsional Behaviour of Steel-Reinforced Concrete-Filled Square Steel Tubular Members

Torsional Behavior of Concrete-Filled Circular Steel Tubes Strengthened with CFRP

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Performance of Concrete-Filled Thin-Walled Steel Tubes under Pure Torsion

Experimental Behaviour of Reinforced Concrete-Filled Steel Tubes under Eccentric Tension

Performance of steel-reinforced circular concrete-filled steel tubular members under combined compression and torsion

Experimental investigation of thin-walled centrifugal concrete-filled steel tubes under torsion

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

MECHANICAL BEHAVIOR AND PARAMETRIC STUDY OF CONCRETE-FILLED STEEL TUBULAR STUB COLUMNS WITH ENCASED PROFILED STEEL UNDER AXAIL COMPRESSION

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Mechanical properties of concrete filled steel tube members constrained by carbon fiber reinforced materials under bidirectional coupled loading

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension