Abstract:Hydraulic fracturing has become an essential stimulation treatment for improving the development efficiency of low-permeability oil reservoirs. However, fracturing fluid inevitably causes reservoir damage. This study proposed a combined method of microscopic and macroscopic experiments to investigate the nature of formation damage of fracturing fluid by quantifying its influence on porosity, permeability, and pore structure. Nuclear magnetic resonance technology combined with core flooding test and parallel sample comparison method was applied to quantitatively evaluate the damage degree and identify the main damage types of hydroxypropyl guar (HPG) fracturing fluid and slickwater fracturing fluid. The microscopic damage mechanisms of these fracturing fluids were analyzed by thin section petrography, X-ray diffraction, rate-controlled mercury intrusion, scanning electron microscopy, and wettability tests. The results show that the total permeability damage degree of HPG fracturing fluid filtrate is 30.43%, of which water sensitivity, water lock, and macromolecule adsorption account for 6.06%, 23.26%, and 1.11%, respectively. Water lock is the major damage factor. Regarding the damage of slickwater fracturing fluid filtrate, water sensitivity causes the severest damage, corresponding to 39.08% of core permeability loss, whereas macromolecule adsorption and water lock contribute 13.21% and 0.97%, respectively. Water sensitivity damage causes reduced porosity, decreased permeability, and narrower pores, resulting from hydration, swelling, dispersion and migration of clay minerals. Water lock damage increases the movable pore volume, decreases the permeability, increases the pore radius, decreases the throat radius, and increases the pore throat ratio, which increases the flow resistance to the oil phase. The magnitude of water lock damage is closely related to the surfactant content and performance, rock wettability, and pore throat radius ratio. Macromolecule adsorption damage leads to a decrease in permeability, a reduction in the number of large pores, an increase in the number of small throats, and an increase in the pore throat radius ratio due to the absorption and retention of macromolecules on the surfaces of the pores and throats. Increasing the flowback volume of slickwater fracturing fluid can recover part of the macromolecule absorption damage. This research can provide a reliable reference for the optimization of fracturing fluid performance, enhancement of the fracturing effect and reservoir protection of low-permeability reservoirs.

EVALUATION AND RECOMMENDED INDEXES FOR THE ULTRA-LOW PERMEABILITY RESERVOIR DAMAGE BY THE MICROBILE IN THE INJECTED WATER

Research on Optimization of Water Quality Index System for Low Permeability Reservoir Water Injection Development

A New Method for Ultra-Low Permeability Reservoir Characterization After Water Flooding Development

Evaluation of the Compatibility Between Formation and Injection Water in Ultra-Low Permeability Reservoirs

The injection capacity evaluation of high-pressure water injection in low permeability reservoir: numerical and case study

Analysis of Controlling Factors at Separate Imbibition Stages for Ultra-Low-Permeability Reservoirs

Intelligent Monitoring and Controlling Technology of Water Injection in Ultra-low Permeability Reservoir of Ordos Basin

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Technology of Water Injection Development in Ultra-Low Permeability Reservoir

Numerical simulation and field application of biological nano-technology in the low- and medium-permeability reservoirs of an offshore oilfield

A novel method of quantitative evaluation and comprehensive classification of low permeability-tight oil reservoirs: A case study of Jidong Oilfield, China

Analysis of the channeling of water injection in low permeability reservoirs with interlayer considering the seepage–stress coupling

Laboratory Evaluation of Placement Behavior of Microgels for Conformance Control in Reservoirs Containing Superpermeable Channels

Study on Green Nanofluid Profile Control and Displacement of Oil in a Low Permeability Reservoir

A Microscopic Experimental Study on the Dominant Flow Channels of Water Flooding in Ultra-High Water Cut Reservoirs

Impact of Ultra-Low Interfacial Tension on Enhanced Oil Recovery of Ultra-Low Permeability Reservoir

A Study on Particle Suspension Flow and Permeability Impairment in Porous Media Using LBM–DEM–IMB Simulation Method

Experimental study of the influencing factors and mechanisms of the pressure-reduction and augmented injection effect by nanoparticles in ultra-low permeability reservoirs

Practice and cognition of effective water-flooding development mode in Gaotaizi block of ultra-low permeability reservoir

Experimental and numerical studies on CO2 injectivity in low permeability oil reservoirs

Characterization of Extra Low-Permeability Conglomerate Reservoir and Analysis of Three-Phase Seepage Law