Abstract:Supported V2O5–WO3/TiO2 materials are employed as selective catalytic reduction (SCR) catalysts for NOx emission control from power plants. Fresh SCR catalysts usually receive exposure to harsh treatments in the industry to accelerate catalyst activation (calcination in air at 650 °C) and catalyst aging (hydrothermal aging at 650 °C) in a way that represents various points in the catalyst/product lifetime. The present study investigates the catalyst structural and chemical changes occurring during such harsh treatments. Three series of supported V2O5–WO3/TiO2 catalysts were prepared by incipient-wetness impregnation of aqueous ammonium metavanadate and metatungstate precursors. The catalysts were subsequently dried and calcined at 550 °C in O2, 650 °C in O2, and hydrothermal conditions (10% O2, 8% H2O, 7% CO2, and 75% N2) at 650 °C. The resulting catalysts were physically characterized by numerous techniques (in situ Raman; in situ IR; in situ high-field–high-spinning solid-state 51V MAS NMR; in situ electron paramagnetic resonance; X-ray diffraction; Brunauer, Emmett, and Teller surface area; and inductively coupled plasma) and chemically probed with adsorbed ammonia, SCR–TPSR, and the SCR reaction. The surface WOx sites on the TiO2 support behave as a textural promoter that stabilizes the TiO2 (anatase) phase from sintering and transforming to the undesirable crystalline TiO2 (rutile) phase that can lead to formation of a Ti1–xVxO2 (rutile) solid solution with reduced V4+ cations (∼7–15%). The surface VOx sites are mostly oligomerized as surface V5+Ox sites (∼50–85% oligomers) and the extent of oligomerization tends to increase with surface WOx coverage and calcination temperature. A major difference between the calcined and hydrothermally treated catalysts was the low concentration of surface NH3* species on Lewis acid sites for the hydrothermally treated catalysts, yet the SCR activity was almost comparable for both catalysts. This finding suggests that surface NH4+*, primarily associated with the surface VOx sites, are able to efficiently perform the SCR reaction. Given that multiple catalyst parameters were simultaneously varying during these treatments, it was difficult to correlate the SCR activity with any single catalyst parameter. A correlation, however, was found between the SCR TOF/activity and the sum of the surface NH3* and NH4+* species, which is dominated by the surface NH4+* species.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02130.ICP of vanadium content of catalysts; crystallite sizes for supported VWTi catalysts treated at 650 °C; EPR determination of V4+; solid-state 51V MAS NMR spectra of dehydrated supported V2O5–WO3/TiO2 catalysts calcined at 650 °C; EPR spectra of non-vanadium species; in situ TP-IR spectra of surface ammonia species during SCR; correlation plots between steady-state SCR TOF values and structural properties of VWTi catalysts; and radar plots of catalytic activity and catalyst properties (PDF)This article has not yet been cited by other publications.

Effect comparison of microwave heating and muffle heating on treatment of spent SCR catalyst

New Approach to the Utilization of Microwave Thermal Energy: Desulfurization and Decarburization of Spent Catalyst Via Microwave Treatment

A promising method to recover spent V2O5–WO3/TiO2 catalyst: treatment by vanadium–titanium magnetite sintering process

A Novel Method of Microwave Heating Mixed Liquid-Assisted Regeneration of V 2 O 5 –WO 3 /tio 2 Commercial SCR Catalysts

Microwave Sodium Roasting (MWSR) Spent HDS Catalysts for Recovery Mo and in Situ Sulfur Fixation

In Situ Treatment by High-Temperature Water Vapor As a Novel Health-Care Approach for Commercial SCR Catalyst

Preparation the Porous Ceramic for Flue Gas Adsorption by Microwave Treatment of Industrial Waste

Disposal of Low Concentration Fume with Solid Waste Modified by Microwave.

In-situ investigation of melting characteristics of waste selective catalytic reduction catalysts during harmless melting treatment

Influence of Different Additives on Harmless Melting Treatment of Waste SCR Catalysts

Study on impregnation process optimization for regenerating the spent V2O5-WO3/TiO2 catalysts

The Effects of Tungsten and Hydrothermal Aging in Promoting NH3-SCR Activity on V2O5/WO3-TiO2 Catalysts

Method and apparatus for microwave-assisted regeneration of SCR denitration catalyst

Multi-scale investigation of the formation and properties of high-grade rutile TiO2 from titanium slags using microwave heating

Influences of Impregnation Procedure on the SCR Activity and Alkali Resistance of V2O5–WO3/TiO2 Catalyst

Sintering Temperature Effects on SCR Catalyst Characterization and Catalytic Efficiency

Enhancement of low-temperature NH3-SCR catalytic activity and H2O & SO2 resistance over commercial V2O5-MoO3/TiO2 catalyst by high shear-induced doping of expanded graphite

Microwave-Assisted Purification of Automotive Emissions

A clean and efficient approach for recovery of vanadium and tungsten from spent SCR catalyst

Enhancement of SCR Activity and Mechanical Stability on Cordierite Supported V2O5-WO3/TiO2 Catalyst by Substrate Acid Pretreatment and Addition of Silica

Structure–Activity Relationships of Hydrothermally Aged Titania-Supported Vanadium–Tungsten Oxide Catalysts for SCR of NO x Emissions with NH 3