Abstract:The present study focused on the establishment of a kinetic model for the removal of phosphorus and zinc from waste lubricating oil by pyrolysis. Zinc dialkyl dithiophosphate (ZDDP) was used as the model compound for the analysis. The pyrolysis of ZDDP was evaluated at different temperatures by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy. Moreover, thermogravimetry (TG), derivative thermogravimetry (DTG), and differential scanning calorimetry (DSC) curves were used to investigate the thermal decomposition characteristics of ZDDP at different heating rates. The apparent activation energies at different conversion rates were calculated by the Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO) methods. Finally, the thermal decomposition mechanism at each stage was determined by a model-based approach. The results indicated that the thermal decomposition process of ZDDP could be described by a four-step thermal decomposition model. The average apparent activation energy calculated by the FWO method was 107.959 kJ mol−1, while that calculated by the KAS approach was 105.0681 kJ mol−1. Additionally, it was established that the decomposition induction stage (II), competitive reaction stage (III), and precipitation stage (IV) involved a power function model reaction (P4) mechanism, Avrami–Erofeev reaction (A3) mechanism, and Avrami–Erofeev reaction (A2) mechanism, respectively. Importantly, the predactyl factor A and reaction rate constant K were also obtained. The outcomes of this study provide a valuable basis for optimizing the process of industrial pyrolysis of waste lubricating oil.The pyrolysis of ZDDP was evaluated at different temperatures by IR and NMR spectroscopy. Moreover, TG, DTG, and DSC curves were used to investigate the thermal decomposition characteristics of ZDDP at different heating rates. The apparent activation energies at different conversion rates were calculated by the KAS and FWO methods. Finally, the thermal decomposition mechanism at each stage was determined by model-based approach.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S0957582021000926-fx1_lrg.jpg">Download : Download high-res image (179KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S0957582021000926-fx1.jpg">Download : Download full-size image</a></li></ol>

Kinetic Investigation in Indirect Thermal Drying of Dewatered Municipal Sludge

Study on Kinetics of Methyl Esterification of Alkali Weight-Reduction Wastewater Residue

Measurement and Modelling of Moisture Distribution and Water Binding Energy of Dredged Sludge

Process and mechanism of indirect thermal drying of sewage sludge

Experimental research on indirect thermal drying process of sewage sludge

Heat and Mass Transfer Characteristics of Oily Sludge Thermal Desorption

Emission Characteristics and Formation Mechanism Analysis of Exhaust during Sludge Thermal Drying Process

Mathematical Modeling of Thin-layer Infrared Drying of Dewatered Municipal Sewage Sludge (DWMSS)

Evaluation of thermal hydrolysis efficiency of mechanically dewatered sewage sludge via rheological measurement

Experimental Study and Assessment of Different Measurement Methods of Water in Oil Sludge

Experimental Study on Thermal Hydrolysis and Dewatering Characteristics of Mechanically Dewatered Sewage Sludge

Effectiveness of biological drying for citric acid dewatered sludge: Evaluating the impact of energy-efficient ventilation strategies

Comparative Study on Drying Characteristics of Sewage Sludge in Two Kinds of Indirect Heat Drying Equipment

Experimental Study on the Composition Evolution and Selective Separation of Biomass Pyrolysis Vapors in the Four-Staged Indirect Heat Exchangers.

Progress in Thermal Analysis Studies on the Pyrolysis Process of Oil Sludge

Novel insights into the biopolymers transformation under wastewater sludge drying process at different temperatures in relation to drying behavior

Influence of drying methods on the thermodynamic parameters, effective moisture diffusion and drying rate of wastewater sewage sludge

Experimental research on thermal drying and combustion characteristics of sludge

Effects of Air Temperature and Humidity on the Kinetics of Sludge Drying at Low Temperatures

Kinetic model for removing phosphorus and zinc from waste lubricating oil by pyrolysis

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer