Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Method for rapid determining the temperature model of near-bit inertial measurement

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Thermal Calibration of Triaxial Accelerometer for Tilt Measurement

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Determination of Thermally Induced Effects and Design Guidelines of Optomechanical Accelerometers

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Patient Navigation Significantly Reduces Delays in Breast Cancer Diagnosis in the District of Columbia

Research of neural network-based model for nonlinear temperature drift compensation of MEMS accelerometers

A Method to Calibrate Accelerometers by Laser Self-Mixing Self-Traceable Grating Interferometry

Thermal calibration for triaxial gyroscope of MEMS-IMU based on segmented systematic method

Calibration method of strapdown inertial measurement unit based on two-axis turntable

A Self-calibration Method for Temperature Errors of Non-orthogonal Angles between Gimbals in Rotational Inertial Navigation System

Precision tilting platform used for static calibration of accelerometers

Self-Calibration Technique with Lightweight Algorithm for Thermal Drift Compensation in MEMS Accelerometers

Calibration Method of Accelerometer Based on Rotation Principle Using Double Turntable Centrifuge

Thermal calibration of a tri-axial MEMS gyroscope based on Parameter-Interpolation method

In-Situ Compensation on Temperature Coefficient of the Scale Factor for a Single-Axis Nano-g Force-Balance MEMS Accelerometer