Compressive holography for imaging behind a diffuser

Zhang,Hua,Zhang,Wenhui,Zhang,Hao,Cao,Liangcai,Jin,Guofan

DOI: https://doi.org/10.1364/dh.2018.dth2e.3

2018-01-01

Abstract:Compressive holography based on sparsity constraint is employed to reconstruct the object behind a weak diffuser. The experimental results demonstrate the effectiveness of the proposed model and the object was extracted from the perturbed hologram.

What problem does this paper attempt to address?

Research of diffraction effect in compressive sensing ghost imaging

Yi CHEN,Xiang FAN,Yu-bao CHENG,Zheng-dong CHENG,Zhen-yu LIANG

DOI: https://doi.org/10.3969/j.issn.1001-5078.2016.11.018

2016-01-01

Abstract:Compressive sensing ghost imaging has made great progress in recent years because it has the characteristics of less number of samples. Aiming at optical field distribution change in ghost imaging,the propagation process of light field was analyzed. The size of the lens makes the diffraction effect more obvious. The facula superposition makes actu-al light field become fuzzy and deviate from the preset value. The light intensity spread function of the diffraction limit-ed system was calculated and the preset light field was revised. However,the revised light field acting as observation matrix can still be reconstructed under the condition of mutual coherence. Experimental results indicate that the re-vised light field is similar to actual light field and observation matrix can reconstruct high-grade picture. So it is sig-nificant to revise preset light field by using light intensity spread function.
Imaging phase objects through diffusers based on lensless digital holography

Wataru Watanabe,Shota Asada,Masaaki Kiyosumi,Hidenobu Arimoto

DOI: https://doi.org/10.1007/s10043-023-00863-3

IF: 1.2

2024-02-02

Optical Review

Abstract:Imaging of phase objects behind scattering media is a challenging task. Intensity imaging through diffusers can be achieved based on digital holography by obtaining the complex amplitude of the diffuser in advance. As described in this paper, we experimentally demonstrate the reconstructed images of phase objects behind diffusers with different diffusion angles by digital holography. Using the complex amplitude information of the diffuser to correct the complex amplitude information of the object through the diffuser, the phase distribution of the object is obtainable behind the diffuser. Imaging of phase objects behind diffusers has been verified through experiments using a plano-convex lens and a wedge substrate as phase objects with various scattering angles. Quantitative analyses of the phase objects are performed. The lens shape can be visualized from the known refractive index. Moreover, the curvature radius can be estimated.

optics
HoloDiffusion: Sparse Digital Holographic Reconstruction via Diffusion Modeling

Liu Zhang,Songyang Gao,Minghao Tong,Yicheng Huang,Zibang Zhang,Wenbo Wan,Qiegen Liu

DOI: https://doi.org/10.3390/photonics11040388

IF: 2.536

2024-04-22

Photonics

Abstract:In digital holography, reconstructed image quality can be primarily limited due to the inability of a single small aperture sensor to cover the entire field of a hologram. The use of multi-sensor arrays in synthetic aperture digital holographic imaging technology contributes to overcoming the limitations of sensor coverage by expanding the area for detection. However, imaging accuracy is affected by the gap size between sensors and the resolution of sensors, especially when dealing with a limited number of sensors. An image reconstruction method is proposed that combines physical constraint characteristics of the imaging object with a score-based diffusion model, aiming to enhance the imaging accuracy of digital holography technology with extremely sparse sensor arrays. Prior information of the sample is learned by the neural network in the diffusion model to obtain a score function, which alternately constrains the iterative reconstruction process with the underlying physical model. The results demonstrate that the structural similarity and peak signal-to-noise ratio of the reconstructed images using this method are higher than the traditional method, along with a strong generalization ability.

optics
Holographic three-dimensional display based on shifted Fraunhofer diffraction

Peng Sun,Zeqing Yu,Chenning Tao,Siqi Liu,Xiao Tao,Chang Wang,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2573430

2020-01-01

Abstract:Holographic display has attracted considerable attention for its high-contrast, low power consumption, wide color gamut and potentials for three-dimensional (3D) display. Although computer-generated hologram (CGH) has the potential for reconstructing all the 3D information of an object, complicated 3D modeling and time-consuming computation are big challenges faced by current 3D holographic display. A simple yet effective method to realize holographic 3D display by shifted Fraunhofer diffraction has been presented in this paper. After a 3D object is divided into a set of layers in axial direction, these layers are calculated into corresponding sub-holograms by Fraunhofer diffraction. The hologram uploaded on SLM consists of sub-holograms in a tiling approach. Both simulations and experiments are carried out to verify the feasibility of shifted Fraunhofer diffraction. Detailed analysis of computational cost has also been carried out, and the comparison between shifted Fresnel diffraction and shifted Fraunhofer diffraction in the proposed method has been analyzed. The Analysis results shows that the process of 3D modeling is simple, that is the computational complexity is accordingly reduced compared with shifted Fraunhofer diffraction. The experimental results demonstrate that our method can reconstruct multi-plane 3D object with continuous depth map. It is expected that the proposed method may provide a better solution in future holographic 3D display research.
Progress on Lensless Digital Holography Imaging Based on Compressive Holographic Algorithm

Zhang Hua,Cao Liangcai,Jin Guofan,David Brady

DOI: https://doi.org/10.3788/lop57.080001

2020-01-01

Laser & Optoelectronics Progress

Abstract:Lensless digital holographic imaging could support high resolution, large field of view and three-dimensional (3D) imaging, but improving the resolution and quality of the reconstruction is still challenging. In this review paper, the compressive holographic models based on diffraction propagation method arc introduced. Compressive sensing arc developed based on total variation regularization and two-step iterative shrinkage/thresholding algorithm. The physical mechanism of removing two-order noise and twin image is discussed. A filter layer is designed to improve the signal to noise ratio of 3D reconstruction. A block-wise algorithm based on effective anti-aliasing region is proposed, which can improve computational efficiency of compressive holography. A single-shot compressive holographic model based on two-angle illumination beam is proposed. It effectively improves the axial resolution of 3D imaging. High-resolution 3D reconstruction of multilayer masks and particle flow field arc demonstrated by using this algorithm.
61-4: Holographic Diffuser Design for Multi-band Beam Shaping

Chao Yu,Yifan Peng,Tianyi Guo,Haifeng Li,Xu Liu

DOI: https://doi.org/10.1002/sdtp.10804

2016-01-01

SID Symposium Digest of Technical Papers

Abstract:Holographic diffuser with designed beam shaping functionality is of significance for various applications in lighting and display industry. We investigate the efficient optimization on a Computer Generated Hologram (CGH) design, to enable the holographic diffuser for multi-band beam shaping. Both synthetic and experimental demonstrations are presented.
Twin-Image-Free Holography: A Compressive Sensing Approach

Wenhui Zhang,Liangcai Cao,David J Brady,Hua Zhang,Ji Cang,Hao Zhang,Guofan Jin

DOI: https://doi.org/10.1103/PhysRevLett.121.093902

2018-08-31

Abstract:Holographic reconstruction is troubled by the phase-conjugate wave front arising from Hermitian symmetry of the complex field. The so-called twin image obfuscates the reconstruction in solving the inverse problem. Here we quantitatively reveal how and how much the twin image affects the reconstruction and propose a compressive sensing (CS) approach to reconstruct a hologram completely free from the twin image. Using the canonical basis, the incoherence condition of CS is naturally satisfied by the Fourier transformation associated with wave propagation. With the propagation kernel function related to the distance, the object wave diffracts into a sharp pattern while the phase-conjugate wave diffracts into a diffuse pattern. An iterative algorithm using a total variation sparsity constraint could filter out the diffuse conjugated signal and overcome the inherent physical symmetry of holographic reconstruction. The feasibility is verified by simulation and experimental results, as well as a comparative study to an existing phase retrieval method.
High space-bandwidth product compressive lensless holography with efficient block-wise model

Hua Zhang,Liangcai Cao,Wenhui Zhang,Hao Zhang,Guofan Jin

DOI: https://doi.org/10.1364/fio.2017.jtu2a.103

2017-01-01

Abstract:The applications of compressive holography are limited by its long processing time due to huge global searching space. A block-wise model is developed with multiple sub-holograms to reduce reconstructed time by fifty times.
Study on Compressive Sensing Phase-shifting Digital Holography

马建设,夏飞鹏,苏萍,任振波

DOI: https://doi.org/10.16818/j.issn1001-5868.2013.01.032

2013-01-01

Abstract:The zero-order diffraction image and the conjugate image can be eliminated using the phase-shifting digital holography.However,the resolution of the hologram and the reconstructed image is limited by the resolution of the CCD used in the digital holography.To reconstruct a higher resolution image from part information of a hologram,the novel compressive sensing algorithm is applied to the sparse reconstruction of digital holograms.The theory of applying the compressive sensing algorithm to reconstruct digital holograms is analyzed.A digital hologram acquired by simulation in computer is reconstructed using this algorithm.The experimental results show that digital holograms can be reconstructed using the compressive sensing algorithm.A high-quality image is reconstructed from the 50% data of the hologram.The zero-order diffraction image and the conjugate image are eliminated.When random measurement is realized by an appropriate measurement device such as a DMD or a random phase plate,digital holograms can be recorded by a single pixel camera to break the limitation of the CCD resolution.
Compressive Holographic Video

Zihao Wang,Leonidas Spinoulas,Kuan He,Huaijin Chen,Lei Tian,Aggelos K. Katsaggelos,Oliver Cossairt

DOI: https://doi.org/10.1364/OE.25.000250

2016-10-28

Abstract:Compressed sensing has been discussed separately in spatial and temporal domains. Compressive holography has been introduced as a method that allows 3D tomographic reconstruction at different depths from a single 2D image. Coded exposure is a temporal compressed sensing method for high speed video acquisition. In this work, we combine compressive holography and coded exposure techniques and extend the discussion to 4D reconstruction in space and time from one coded captured image. In our prototype, digital in-line holography was used for imaging macroscopic, fast moving objects. The pixel-wise temporal modulation was implemented by a digital micromirror device. In this paper we demonstrate $10\times$ temporal super resolution with multiple depths recovery from a single image. Two examples are presented for the purpose of recording subtle vibrations and tracking small particles within 5 ms.

Computer Vision and Pattern Recognition,Optics
Applications of Diffuser for Volume Holographic Memory and Correlator

GF Jin,LC Cao,QS He

DOI: https://doi.org/10.1117/12.667715

2006-01-01

Abstract:Correlation selectivity of the speckle encoding method with a diffuser in the reference beam or the object beam for volume holographic storage system is analyzed. Unlike Bragg selectivity, correlation selectivity has no sidelobes and does not depend on the thickness of the recording medium. Thus the intrapage crosstalk can be greatly suppressed. For a volume holographic memory, the reference beam is modulated with the diffuser, which can sharpen the diffraction efficiency curve (versus the angular deviation). It helps increase the storage density and improve the quality of the reconstructions. For a volume holographic correlator, the signal beam is modulated with the diffuser, which can sharpen the correlation peak and suppress the correlation sidelobes. It helps improve the parallelism and accuracy of the holographic correlator. It is shown that the diffuser techniques are effective and feasible to improve the performance of the volume holographic storage and correlation system.
Study on Numerical Focusing Compressive Holographic Imaging

Zhang Yiyi,Huang Zhengzhong,Yang Feng,Jin Shangzhong,Cao Liangcai

DOI: https://doi.org/10.3788/lop202158.1811019

2021-01-01

Abstract:In holographic reconstruction, the two-order and twin image noise produced by the phase-conjugate wave arising from the symmetry of the complex field, will affect the accuracy and the image quality of the reconstructed image. The acquisition of the holographic focus distance parameter for judging the best focal plane of object is also the key to holographic imaging. In this work, a numerical focusing imaging algorithm based on compressive sensing is proposed. By choosing a stack of reconstructed images in the axial direction with fixed interval, every image is processed by the total variation regularization. These images are used to calculate and construct the focus curve of the digital holography according to the focus metrics such as the tamura coefficient and the absolute gradient operator. Then the best focus plane is evaluated. The proposed method suppresses the noise of in -line digital reconstruction, improves the axial accuracy of reconstructing, and realizes a larger range of high-resolution imaging around the focus plane.
Holographic Diffuser for Diffusion to Definite Direction

L Du,NG Lu,XP Lang,YC Shi,YQ Li

DOI: https://doi.org/10.1117/12.263122

1996-01-01

Abstract:This paper presents a holographic diffuser for diffusion to definite direction. It can be used as objective carrier in an imaging system. The holographic diffuser has several functions of diffuser, prism and field lens. The angle of diffraction can be controlled. So the holographic diffusers have many advantages over conventional diffusers.
Holographic imaging through a scattering medium by diffuser-aided statistical averaging

Michael J Purcell,Manish Kumar,Stephen C Rand,Vasudevan Lakshminarayanan,Michael J. Purcell,Stephen C. Rand

DOI: https://doi.org/10.1364/josaa.33.001291

2016-06-08

Journal of the Optical Society of America A

Abstract:We introduce a practical digital holographic method capable of imaging through a diffusive or scattering medium. The method relies on statistical averaging from a rotating ground glass diffuser to negate the adverse effects caused by speckle introduced by a static diffuser or scattering medium. In particular, a setup based on Fourier transform holography is used to show that an image can be recovered after scattering by introducing an additional diffuser in the optical setup. This method is capable of recovering object information from behind a scattering layer in biomedical or military imaging applications.
Removal of Defocused Images Using Three-Dimensional Nonlinear Diffusion Based on Digital Holography

Wei-Na Li,Zhengyun Zhang,Ping Su,Jianshe Ma,Xiaohao Wang

DOI: https://doi.org/10.1088/2040-8986/ab5bad

IF: 2.1

2020-01-01

Journal of Optics

Abstract:We combine the 3D hybrid-Weickert nonlinear diffusion regularizer with digital holography, which can distinguish the locations of certain small-sized particles that are overlapped along the z-axis, to realize autofocusing of multiple micro-objects and simultaneously remove the defocused images. The proposed method is applied to all the reconstruction slices generated from the hologram after each back-propagation. After applying the proposed scheme for certain small-sized particles, the reconstructed image at the ground truth z position is retained, the defocused images are diffused out when the reconstruction range along the z-axis is sufficiently long and the reconstruction depth spacing is sufficiently fine. The results demonstrated that the proposed scheme can diffuse out the defocused images that are 20 mu m from the ground truth z position, despite several scattering particles of different diameters being completely overlapped along the z-axis with a distance of 800 mu m when the hologram pixel pitch is 2 mu m. In addition, the results revealed that the sparsity distribution of the ground truth z slice is not affected by the sparsity distribution of the corresponding defocused images when the diameter of the particle is less than 35 mu m and the reconstruction depth spacing is more than 20 mu m.
Iterative Reconstruction of Diffraction Limited Digital Holography

Zhengzhong Huang,Liangcai Cao

DOI: https://doi.org/10.1117/12.2593606

2021-01-01

Abstract:Digital holographic imaging has the characteristics of fast and flexible with simple set up, and it can quantitatively obtain the intensity and phase of objects. The resolution of the reconstructed image is greatly limited by the pixelated imaging detectors during the digitization processing of holograms. Due to the limited diffraction bandwidth, the diffracted beam of each object point can be viewed as a diffractive cone. The lack of diffraction components causes the reconstructed quality to decrease when the detector cannot collect a complete diffracted wave field in the inline holography. In this work, we studied the reconstructed quality of holograms under different sampling forms. The losing diffraction components can be reconstructed by using an iterative algorithm based on energy attenuation and support constraints. We propose three iterative methods. The first is the bicubic interpolation and extrapolation iterative method based on a single small detector. The second is multi-plane extrapolation iterative method. The third is a faithful iterative reconstruction based on a sparse sensor array. When the diffraction component recorded by the hologram is missing, the losing diffraction components can be reconstructed by using the principle of the holographic redundancy. The reduction of reconstruction quality caused by the loss of sampling in the small-sized detector and sparse sensor array in the digital holography can be compensated.
Uniform illumination with a band-limited diffuser in volume holographic storage system

minxian wu,guofan jin,liangcai cao,qingsheng he,haoyun wei

DOI: https://doi.org/10.1364/ods.2003.tue24

2003-01-01

Abstract:Uniform illumination on the object plane is achieved by using a band-limited diffuser. Vibrating the diffuser reduces speckle noise and smoothes the spectrum for storage.
Iterative Projection Meets Sparsity Regularization: Towards Practical Single-Shot Quantitative Phase Imaging with In-Line Holography

Yunhui Gao,Liangcai Cao

DOI: https://doi.org/10.37188/lam.2023.006

2023-01-01

Light Advanced Manufacturing

Abstract:Holography provides access to the optical phase. The emerging compressive phase retrieval approach can achieve in-line holographic imaging beyond the information-theoretic limit or even from a single shot by exploring the signal priors. However, iterative projection methods based on physical knowledge of the wavefield suffer from poor imaging quality, whereas the regularization techniques sacrifice robustness for fidelity. In this work, we present a unified compressive phase retrieval framework for in-line holography that encapsulates the unique advantages of both physical constraints and sparsity priors. In particular, a constrained complex total variation (CCTV) regularizer is introduced that explores the well-known absorption and support constraints together with sparsity in the gradient domain, enabling practical high-quality in-line holographic imaging from a single intensity image. We developed efficient solvers based on the proximal gradient method for the non-smooth regularized inverse problem and the corresponding denoising subproblem. Theoretical analyses further guarantee the convergence of the algorithms with prespecified parameters, obviating the need for manual parameter tuning. As both simulated and optical experiments demonstrate, the proposed CCTV model can characterize complex natural scenes while utilizing physically tractable constraints for quality enhancement. This new compressive phase retrieval approach can be extended, with minor adjustments, to various imaging configurations, sparsifying operators, and physical knowledge. It may cast new light on both theoretical and empirical studies.
Compressive Holography for Multilayer Imaging

Ping Su,Zhenpeng Luo,Jianshe Ma

DOI: https://doi.org/10.1364/dh.2020.hf3d.2

2020-01-01

Abstract:Compressive sensing (CS) is employed in holographic imaging for multilayer imaging. We show tomography of a continuous sample by introducing a microscope objective (MO) in an in-line compressive holographic system, and analyze the reasons why applying compressive holographic microscopy can achieve tomography of continuous samples.
Computational imaging without a computer: seeing through random diffusers at the speed of light

Yi Luo,Yifan Zhao,Jingxi Li,Ege Çetintaş,Yair Rivenson,Mona Jarrahi,Aydogan Ozcan

DOI: https://doi.org/10.1186/s43593-022-00012-4

2022-01-26

eLight

Abstract:Abstract Imaging through diffusers presents a challenging problem with various digital image reconstruction solutions demonstrated to date using computers. Here, we present a computer-free, all-optical image reconstruction method to see through random diffusers at the speed of light. Using deep learning, a set of transmissive diffractive surfaces are trained to all-optically reconstruct images of arbitrary objects that are completely covered by unknown, random phase diffusers. After the training stage, which is a one-time effort, the resulting diffractive surfaces are fabricated and form a passive optical network that is physically positioned between the unknown object and the image plane to all-optically reconstruct the object pattern through an unknown, new phase diffuser. We experimentally demonstrated this concept using coherent THz illumination and all-optically reconstructed objects distorted by unknown, random diffusers, never used during training. Unlike digital methods, all-optical diffractive reconstructions do not require power except for the illumination light. This diffractive solution to see through diffusers can be extended to other wavelengths, and might fuel various applications in biomedical imaging, astronomy, atmospheric sciences, oceanography, security, robotics, autonomous vehicles, among many others.

English Else

Compressive holography for imaging behind a diffuser

Research of diffraction effect in compressive sensing ghost imaging

Imaging phase objects through diffusers based on lensless digital holography

HoloDiffusion: Sparse Digital Holographic Reconstruction via Diffusion Modeling

Holographic three-dimensional display based on shifted Fraunhofer diffraction

Progress on Lensless Digital Holography Imaging Based on Compressive Holographic Algorithm

61-4: Holographic Diffuser Design for Multi-band Beam Shaping

Twin-Image-Free Holography: A Compressive Sensing Approach

High space-bandwidth product compressive lensless holography with efficient block-wise model

Study on Compressive Sensing Phase-shifting Digital Holography

Compressive Holographic Video

Applications of Diffuser for Volume Holographic Memory and Correlator

Study on Numerical Focusing Compressive Holographic Imaging

Holographic Diffuser for Diffusion to Definite Direction

Holographic imaging through a scattering medium by diffuser-aided statistical averaging

Removal of Defocused Images Using Three-Dimensional Nonlinear Diffusion Based on Digital Holography

Iterative Reconstruction of Diffraction Limited Digital Holography

Uniform illumination with a band-limited diffuser in volume holographic storage system

Iterative Projection Meets Sparsity Regularization: Towards Practical Single-Shot Quantitative Phase Imaging with In-Line Holography

Compressive Holography for Multilayer Imaging

Computational imaging without a computer: seeing through random diffusers at the speed of light