Abstract:Objective: A novel X-ray field produced by an ultrathin conical target is described in the literature. However, the optimal design for an associated collimator remains ambiguous. Current optimization methods using Monte Carlo calculations restrict the efficiency and robustness of the design process. A more generic optimization method that reduces parameter constraints while minimizing computational load is necessary. A numerical method for optimizing the longitudinal collimator hole geometry for a cylindrically-symmetrical X-ray tube is demonstrated and compared to Monte Carlo calculations. Approach: The X-ray phase space was modelled as a four-dimensional histogram differential in photon initial position, final position, and photon energy. The collimator was modelled as a stack of thin washers with varying inner radii. Simulated annealing was employed to optimize this set of inner radii according to various objective functions calculated on the photon flux at a specified plane. Main results: The analytical transport model used for optimization was validated against Monte Carlo calculations using Geant4 via its wrapper, TOPAS. Optimized collimators and the resulting photon flux profiles are presented for three focal spot sizes and five positions of the source. Optimizations were performed with multiple objective functions based on various weightings of precision, intensity, and field flatness metrics. Finally, a select set of these optimized collimators, plus a parallel-hole collimator for comparison, were modelled in TOPAS. The evolution of the radiation field profiles are presented for various positions of the source for each collimator. Significance: This novel optimization strategy proved consistent and robust across the range of X-ray tube settings regardless of the optimization starting point. Common collimator geometries were re-derived using this algorithm while simultaneously optimizing geometry-specific parameters. The advantages of this strategy over iterative Monte Carlo-based techniques, including computational efficiency, radiation source-specificity, and solution flexibility, make it a desirable optimization method for complex irradiation geometries.

Shape optimal design of leaf end for multileaf grating

Lateral Penumbra Modelling Based Leaf End Shape Optimization for Multileaf Collimator in Radiotherapy.

Rounded Leaf End Effect of Multileaf Collimator on Penumbra Width and Radiation Field Offset: an Analytical and Numerical Study

Novel multileaf collimator designs with tongues and grooves in leaf end and Monte Carlo simulations

Ray Tracing Algorithm for Virtual Source Modeling based on Evaluation of Rounded Leaf End Effect of Multileaf Collimator

Robust 3-D Shape Optimization of Electromagnetic Devices by Combining Sensitivity Analysis and Adaptive Geometric Parameterization

Optimal Shape Design of 3-D Nonlinear Electromagnetic Devices Using Parameterized Design Sensitivity Analysis

Design and performance of a novel multi‐leaf collimator composed of leaves with fixed and movable layers

Improving the Imrt Plan Quality by Minimizing the Discrepancy Between the Optimized and Segmented Intensity Maps

A Quasi-Optimal Shape Design Method for Electromagnetic Scatterers Based on NURBS Surfaces and Filter-Enhanced GWO

Beam Shaping for Multicolour Light-Emitting Diodes with Diffractive Optical Elements

SU-FF-T-350: Optimizing the MLC Apertures for Conformal Radiotherapy with a Hybrid Algorithm

Technical Note: Investigating of dosimetric leaf gap and leaf transmission factor variations across gantry and collimator angles in volumetric modulation arc therapy

SU-FF-T-340: Penumbra Evaluation of the Synergy-S and Novalis Micro-MLCs

Direct leaf trajectory optimization for volumetric modulated arc therapy planning with sliding window delivery

Numerical optimization of longitudinal collimator geometry for novel x-ray field

Impact of Multileaf Collimator Configuration Parameters on the Dosimetric Accuracy of 6-MV Intensity-Modulated Radiation Therapy Treatment Plans

Optimization of the Hole Exit Shaping of Film Holes Without and with Compound Angles for Maximal Film Cooling Effectiveness

Analysis of multi-leaf collimator leaf position deviation in volumetric modulated arc therapy

Layout Optimization Of Corrector Magnets For A Proton Therapy Beamline Via Genetic Algorithm

Optimization of Spatial Dose Distribution for Controlling Sidewall Shape in Electron-beam Lithography