Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Fault Characteristics of CFRC Unidirectional Laminated Plate Based on Acoustic Emission

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

A Study on the Failure Mechanisms of Carbon Fiber/epoxy Composite Laminates Using Acoustic Emission

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Reconstruction of Cracks in a Carbon Fiber-Reinforced Polymer Laminate Plate from Signals of Eddy Current Testing

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Study on Delamination Damage of CFRP Laminates Based on Acoustic Emission and Micro Visualization

Attenuation characteristics of Lamb wave in carbon fiber reinforced composite laminated plate

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

Damage Classification and Evolution in Composite under Low-Velocity Impact Using Acoustic Emission, Machine Learning and Wavelet Packet Decomposition

Review on acoustic emission source location, damage recognition and lifetime prediction of fiber-reinforced composites

Hierarchical-level Failure Analysis for CFRC Lattice Stiffened Panel

Defect Detection Method for CFRP Based on Line Laser Thermography

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

Failure mechanisms and acoustic emission pattern recognition of all-CFRP cylindrical honeycomb sandwich shell under three-point bending

Non-destructive testing and structural health monitoring technologies for carbon fiber reinforced polymers: a review

Air-coupled transducer tilted C-scan for delamination introduced during the manufacturing process in CFRP plates