Abstract:In this study, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B-K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

Hierarchical-level Failure Analysis for CFRC Lattice Stiffened Panel

Multi-failure analyses of carbon fiber reinforced anisogrid lattice cylinders

Two-level Homogenization and Multi-Failure Analyses of Hierarchical Lattice Stiffened Cylinder

Applying a thermodynamic-based method to reveal the failure laws of CFRP stiffened plates

Constitutive Relations and Failure Criterion of Planar Lattice Composites

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

Compression and Bending Performances of Carbon Fiber Reinforced Lattice-Core Sandwich Composites

Recent Progresses in Lightweight Carbon Fibre Reinforced Lattice Cylindrical Shells

On Quasi-Static and Dynamic Compressive Behaviors of Interlocked Composite Kagome Lattice Structures

Fabrication and mechanical behaviors of corrugated lattice truss composite sandwich panels

Failure mechanism and bearing force of CFRP strengthened square hollow section under compressive load

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

Manufacturing and Testing of a CFRC Sandwich Cylinder with Kagome Cores

Multi-failure Analysis of Composite Isogrid Stiffened Cylinders

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Design and Mechanical Characterization of Lattice Sandwich Cylindrical Shells

Mechanical behavior of the CFRP lattice core sandwich bolted splice joints

Equivalent analysis and failure prediction of quasi-isotropic composite sandwich cylinder with lattice core under uniaxial compression

Low-velocity impact responses of the stiffened composite laminated plates based on the progressive failure model and the layerwise/solid-elements method

Stressing State Evolution Characteristics of I-section CFRP Laminates Revealed by Thermodynamic Modeling