Abstract:The morphology of the contact surface between cast-in-place engineering structures and soil is generally random. Previous research focusing on the shear mechanical properties of soil–concrete interfaces has predominantly concentrated on the role of interface roughness by constructing regular concrete surface types, largely neglecting the potential impact of the roughness morphology (i.e., the morphology of the concrete surface). In this study, concrete blocks with the same interface roughness and different roughness morphologies were constructed based on the sand-cone method, including random rough surface, triangular groove surface, rectangular groove surface, trapezoid groove surface, and semicircular groove surface. A series of direct shear tests were conducted on the rough and smooth sand–concrete interfaces, as well as on natural sand. Through these tests, we examined the shear mechanical behavior and strength of the sand–concrete interfaces, and analyzed the underlying shear mechanisms. The results showed that: (i) the interface morphology had little effect on the variation in the shear stress–displacement curve of sand–concrete interfaces, and it had a significant influence on the shear strength of the interfaces; (ii) under the same normal stress, the shear strength of the sand–concrete interfaces with a random rough surface was the greatest, followed by the triangular groove surface, while the shear strength of the rectangular groove surface proved the lowest; (iii) the shear strength of the sand–concrete interfaces with the same roughness was affected by the size of the contact area between the concrete plane and the sand, that is, a larger contact area correlated with a decrease in shear strength. It can be concluded that the shear strength value of a sand–concrete surface with the triangular groove is the closest to the shear strength of a random rough interface. By gaining a deep understanding of the effects of different contact surface morphologies on shear strength and shear behavior, significant insights can be provided for optimizing engineering design and enhancing engineering performance.

Experimental Study on Mechanical Characteristics of Soil-Structure Interface

Experimental Study on Monotonic Behavior of Interface Between Soil and Structure

Shear mechanical properties of the interface between soil-rock mixture and rough structural plane

Testing and Modeling of Soil-Structure Interface

Study on surface roughness effect on shear behavior of concrete-soil interface

Effects of the soil water content and relative roughness on the shear strength of silt and steel plate interface

Consideration of Different Soil Properties and Roughness in Shear Characteristics of Concrete–Soil Interface

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Shear characteristics of interface based on subloading-friction model

STUDY OF SHEAR PROPERTIES OF SILTY CLAY-CONCRETE INTERFACE BY SIMPLE SHEAR TESTS

Research on Shear Behavior of Sand–Structure Interface Based on Monotonic and Cyclic Tests

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Friction Characteristics Between Marine Clay and Construction Materials

Test Study on Behavior of Interface Between Structure and Coarse Grained

A study on the cyclic shear and particle breakage characteristics of the interface between steel and calcareous sand

Experimental Study on Mechanical Behavior of Interface Between Two Granular Materials

Experimental Investigation into Cyclic Shear Behaviors in the Interface Between Steel and Crushed Mudstone Particles

Monotonic Behavior of Interface Shear Between Carbonate Sands and Steel

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Influence of soil particle size on monotonic and cyclic direct shear behaviors of geogrid-soil interface

Effects of Interface Morphology on the Shear Mechanical Properties of Sand–Concrete Interfaces