Abstract:This study systematically investigated the mechanical properties of marine volcanic-scoria concrete (MVSC) under the coupled effects of the mix components. Six groups and 408 specimens were used, including four different experimental parameters: types of coarse and fine aggregates (volcanic-scoria aggregate and natural aggregate), types of mixing water (seawater and freshwater), and age (days 7, 14, and 28). The macro-mechanical properties, mechanism, and microstructure of MVSC were analysed using a novel test system, including an axial compression test, digital image correlation (DIC) method, and scanning-electron microscopy (SEM). Variations in the failure pattern, stress–strain curve, deformation field distribution, crack initiation, and propagation of MVSC were studied. Generally, the failure of MVSC is brittle compared to that of ordinary concrete (OC). The cubic compressive strengths of MVSC at day 7 and 14 were 82.7% and 91.7% of the cubic compressive strength at day 28, respectively. The splitting tensile strength of MVSC was 7.3% higher on average than that of OC. The mix components changed the strength of MVSC. Seawater and sea sand accelerated the development of compressive strength, volcanic-scoria fine, and coarse aggregates (VSFA and VSCA, respectively) enhanced the tensile strength. After using volcanic-scoria aggregates, the curvature of the concrete stress–strain curve decreased; however, the curve declined sharply after the peak stress (σ max ). Compared with OC, the ductility of MVSC decreased by an average of 17.2%, whereas the peak strain increased by 6.9%. Furthermore, VSCA significantly changed the displacement distributions of the specimen, whereas the impacts of the mixing water and fine aggregate were small. The crack initiation and propagation of MVSC were different from those of OC; that is, microcracks first appeared in VSCA, and their characteristics propagated slowly before σ max . Finally, a theoretical model of the MVSC stress–strain curve involving the coupled impacts of the mix components was established, which can prompt the practical application of MVSC structures.

Primary Chemical - Physical Properties of Marine Cement-Based Materials

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Concrete Admixed with Modified Auxiliary Cementing Materials for Real Sea Service

Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete in Marine Tidal Zone

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Primary Physical-Mechanical Characteristics on Marine Sediments from Zhoushan Seas in Sino Mainland

The Mechanical Properties of Polymer-cement Mortar

Assessment of mechanical behavior and failure criteria under varied confining pressures in treated calcareous sand

Durability of MICP-reinforced Calcareous Sand in Marine Environments: Laboratory and Field Experimental Study

Effects of mix components on mechanical properties of marine volcanic-scoria concrete under axial compression

Effect of Compound Nano-Caco3 Addition on Strength Development and Microstructure of Cement-Stabilized Soil in the Marine Environment

A simple experimental method to regain the mechanical behavior of naturally structured marine clays

The Evolution Of The Microstructure And Mechanical Properties Of Coral Aggregate Mortar Under Uniaxial Compression Using Ultrasonic Analysis

Experiment on Compressive Properties and Microscopic Analysis of Sea Sand Geopolymer-Based Recycled Concrete

Enhancing the mechanical properties of marine clay using cement solidification

Mechanical and micro-mechanical investigations of nano-SiO2 and polypropylene fiber reinforced cement soil in marine environments

Experimental Study On the Effect of Hydrate Filling On the Mechanical Properties of Marine Sediments in the Shenhu Area, South China Sea

Long-term mechanical performance of marine sediments solidified with cement, lime, and fly ash

Laboratory test on long-term deterioration of cement soil in seawater environment