Abstract:Calcareous sand erosion under natural environment changes or human activities is a major concern to many coastal zones, where weak and loose calcareous sands are usually encountered. To improve the tensile behavior and structural integrity of such sands, we combine the fiber reinforcement method and the bio-cementation technique based on microbially induced carbonate precipitation (MICP) for calcareous sand treatment. Various fiber-sand mixtures are prepared by mixing calcareous sand with different amount of fibers, including 0.00%, 0.05%, 0.10%, 0.15%, 0.20%, 0.25%, 0.30% and 0.40%, before the bio-cementation process. To investigate the tensile strength as well as the post-peak response, we conduct the direct tensile test on these bio-cemented, fiber-reinforced sand samples. Experimental results highlight the interplay of MICP and fiber inclusions in strengthening microscale inter-particle binding and improving macroscopic tensile behaviors. The tensile strength of the sample increases with the increasing calcium carbonate content. The inclusion of fibers increases the sand ductility, but excessive amount of fibers may cause negative effects on the sand tensile strength due to the possible presence of more micro-voids and the resulting structural heterogeneity. Given varying fiber contents, we identify two types of stress-strain responses under the direct tensile load. With higher fiber content, the overall stress strain response follows four phases, with phase I representing the linear breakage of cemented sand body, phase II responding to the sudden stress drop due to the brittle failure of cemented sand, phase III related to the elastoplastic deformation of fibers, and phase IV for the pull-out or snapping of fibers. In comparison, with lower fiber content, phase III does not exist because of the much higher stress distributed to each individual fiber. Scanned Electron Microscopy observations further reveal that the increasing calcite precipitations strengthen the fiber reinforcement effect and the increasing fibers provide more surfaces that facilitate the calcite precipitations. This study provides new insights into the tensile behavior of bio-cemented, fiber-reinforced sands and contributes to possible future implementations for coastal erosion control.

Assessment of mechanical behavior and failure criteria under varied confining pressures in treated calcareous sand

Mechanical behavior and particle breakage of calcareous sand in triaxial test

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Experimental study of the mechanical behavior of calcareous sand under repeated loading-unloading

Long-term behaviour and degradation of calcareous sand under cyclic loading

Experimental investigation on mechanical behavior and particle crushing of calcareous sand retrieved from South China Sea

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Enhancing Load-Bearing Capacity of Calcareous Sands through Gel Stabilization: A Mechanical and Material Characterization Study

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Stress–dilatancy behavior of dense marine calcareous sand under high-cycle loading: An experimental investigation

Investigation of the Mechanical Properties of Reinforced Calcareous Sand Using a Permeable Polyurethane Polymer Adhesive

Investigation on the mechanical properties of a calcareous sand: the role of the initial fabric

Shear behavior of bio-cemented calcareous sand treated through bio-stimulation under the direct shear condition

Effect of High-Stress Levels on the Shear Behavior of Geosynthetic-Reinforced Marine Coral Sands

Effect of Confining Pressure and Strain Rate on Mechanical Behaviors and Failure Characteristics of Sandstone Containing a Pre-existing Flaw

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand

Unified Failure Strength Criterion for Terrace Slope Reinforcement Materials

The role of incremental stress ratio in mechanical behavior and particle breakage of calcareous sand

Tensile behavior of bio-cemented, fiber-reinforced calcareous sand from coastal zone

Cumulative deformations and particle breakage in calcareous sand subjected to drained high-cyclic loading: Experimental investigation