Abstract:This study systematically investigated the mechanical properties of marine volcanic-scoria concrete (MVSC) under the coupled effects of the mix components. Six groups and 408 specimens were used, including four different experimental parameters: types of coarse and fine aggregates (volcanic-scoria aggregate and natural aggregate), types of mixing water (seawater and freshwater), and age (days 7, 14, and 28). The macro-mechanical properties, mechanism, and microstructure of MVSC were analysed using a novel test system, including an axial compression test, digital image correlation (DIC) method, and scanning-electron microscopy (SEM). Variations in the failure pattern, stress–strain curve, deformation field distribution, crack initiation, and propagation of MVSC were studied. Generally, the failure of MVSC is brittle compared to that of ordinary concrete (OC). The cubic compressive strengths of MVSC at day 7 and 14 were 82.7% and 91.7% of the cubic compressive strength at day 28, respectively. The splitting tensile strength of MVSC was 7.3% higher on average than that of OC. The mix components changed the strength of MVSC. Seawater and sea sand accelerated the development of compressive strength, volcanic-scoria fine, and coarse aggregates (VSFA and VSCA, respectively) enhanced the tensile strength. After using volcanic-scoria aggregates, the curvature of the concrete stress–strain curve decreased; however, the curve declined sharply after the peak stress (σ max ). Compared with OC, the ductility of MVSC decreased by an average of 17.2%, whereas the peak strain increased by 6.9%. Furthermore, VSCA significantly changed the displacement distributions of the specimen, whereas the impacts of the mixing water and fine aggregate were small. The crack initiation and propagation of MVSC were different from those of OC; that is, microcracks first appeared in VSCA, and their characteristics propagated slowly before σ max . Finally, a theoretical model of the MVSC stress–strain curve involving the coupled impacts of the mix components was established, which can prompt the practical application of MVSC structures.

The Evolution Of The Microstructure And Mechanical Properties Of Coral Aggregate Mortar Under Uniaxial Compression Using Ultrasonic Analysis

Characterization of mechanical properties and microstructure of silica mortar and coral mortar based on nuclear magnetic resonance technology

Study of the Effects of Fine Coral Powder and Salinity on the Mechanical Behaviour of Coral Sand-Seawater Cement Mortar

Experimental Study on the Mechanical Properties and Uniaxial Compressive Constitutive Relationship of Sea Sand Coral Concrete

Performance Evaluation and Microstructure Characterization of Seawater and Coral/sea Sand Alkali-Activated Mortars

Enhancing Mechanical Performance and Crack Morphology of Engineered Cementitious Composites Through Tailoring Coral Sand

Effect of Grain Size on Ductility and Failure Mechanism of Fiber-reinforced Coral Sand Cement-based Composites

Mechanical behavior of coral gravel during triaxial test using X-ray computed tomography

Mechanical properties and constitutive model of coral aggregate concrete subjected to dynamic uniaxial and triaxial compression

Mechanical Characteristics And Failure Prediction Of Cement Mortar With A Sandwich Structure

Quantitative Characterization of Multiple Cracks and Permeability in Coral Sand Engineered Cementitious Composites Based on Micro-Computed Tomography

Analysis of Early-Age Hydration Behavior and Micro-Mechanism of Coral Sand Cement Mortar

Coupling Effect of Strain Rate and Specimen Size on the Compressive Properties of Coral Aggregate Concrete: A 3D Mesoscopic Study

Mechanical properties of modified coral aggregate seawater sea-sand concrete: Experimental study and constitutive model

Hardening Mechanism of Coral Aggregates in Cement-Based Systems

Mesoscopic Investigation of the Matrix Pores and ITZ Effects on the Mechanical Properties of Seawater Sea-Sand Coral Aggregate Concrete

Effects of mix components on mechanical properties of marine volcanic-scoria concrete under axial compression

Mechanical properties and crack width control of seawater coral sand ECC

Effect of Water Environment on Mechanical Behavior of Coral Aggregate Concrete

Experimental Study on the Mechanical Strength, Deformation Behavior and Infiltration Characteristics of Coral Sand

Strength and Fracture Properties of Coral Concrete under Impact of Coral Aggregate Type and Fiber Hybridization