Abstract:Water hammer influences the life cycle of hydraulic passages and may even cause catastrophic structural failures. Several catastrophic failures of hydraulic power units have been reported in the literature due to the effects of transient regimes. The objective of the study is to highlight the global trend in water hammer assessment and to quantify the effect of factors influencing overpressure in hydraulic passages during load rejection in different hydropower plants. A brief and concise literature review is conducted to document the parameters associated with the water hammer phenomenon and to thereby identify the necessary prerequisites to validate theoretical and numerical results against experimental data. The purpose of the analysis is to identify extreme transient loads on hydraulic passages in order to properly adapt hydropower unit operation, to make recommendations for design and industry, and to guide the progress of adapted models and numerical simulations to capture complex phenomena. Empirical correlations are determined based on the experimental data that are transferable from one unit to another, even if a deep flow analysis is performed. The experimental results confirm that the rapid closure rate of the guide vanes has a significant impact on the phenomenon. A third order polynomial equation is applied to capture the general overpressure trends. Equation parameters change from case to case depending on the type of hydraulic power unit, closing rate and the type of hydraulic passage. The results confirm also that overpressure values depend significantly on other factors, some of which are not usually taken into account (e.g., runner speed). Experimental correlations make it possible to understand the water hammer phenomenon, which could help not just assessing and optimizing loads, but also verifying and validating more complex physical models, to ensure that hydraulic passages are reliable. A well-documented analysis also makes it possible to optimize equipment design, improve and adapt maintenance programs and to recommend appropriate operating parameters to increase equipment lifespan, while preventing incidents.

Effect of errors in predicting the water hammer types and pressures in a simple pipeline

Study on optimal water hammer protection for high-head and multi-undulation water conveyance system and empirical formulae for pressure head at nodes

Study of Resistance Distribution and Numerical Modeling of Water Hammer in a Long-Distance Water Supply Pipeline

A study of the numerical simulation of water hammer with column separation and cavity collapse in pipelines

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Dynamic Interaction Between Valve-Closure Water Hammer Wave and Centrifugal Pump

Based on the Simulation of Water Hammer Weak Section Analysis of Long-distance Pipeline Operation

Numerical Simulation of the Water Hammer Caused by Accidental Pump-stop in Long Water Supply Systems

The Impact of Water Hammer on Hydraulic Power Units

Analysis on Mathematical Model for Water Hammer in Pressure Pipeline and Discussion on Its Protection

Analysis of State-Changing Water Hammer in A Long Pipe

Analytical Study on Water Hammer Pressure in Pressurized Conduits with a Throttled Surge Chamber for Slow Closure

A Simulation Calculation Method of a Water Hammer with Multpoint Collapsing

Wellbore annulus water hammer pressure prediction based on transient multi-phase flow characteristics

Water hammer analysis of district heating networks

Hydrodynamic Analysis Of Water Hammer Phenomena In Hydropower Stations Under Turbine Extreme Operating Conditions

An Experimental Study on the Water Hammer with Cavity Collapse under Multiple Interruptions

Water Hammer Prediction and Control: the Green'S Function Method

Case study: Water hammer protection in long distance water pipeline with ultra-high lift

Computational Analysis of Water Hammer Prevention Devices for Solid-Liquid Two-Phase Flow Pipelines

Numerical Simulation of Water Hammer in Pipeline System Using Efficient Wave Tracking Method