Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

Early damage of cracks and rutting analysis in ultra-thin asphalt pavement

Premature Pavement Distresses of Cracks and Rutting Analysis and Mechanical Analysis in Ultra-Thin Asphalt Pavement

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Review of Mechanistic-Empirical Modeling of Top-Down Cracking in Asphalt Pavements

Analysis of the Fatigue Crack Propagation Process of the Stress-Absorption Layer of Composite Pavement Based on Reliability

A Calibrated Mechanics-Based Model for Top-Down Cracking of Asphalt Pavements

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Evaluation of Flexible Pavement Deterioration Conditions Using Deflection Profiles under Moving Loads

Enhanced Model for Thermally Induced Transverse Cracking of Asphalt Pavements

Energy-based Crack Initiation Model for Load-Related Top-Down Cracking in Asphalt Pavement

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Research on the Damage Mechanics Model of Asphalt Pavement Based on Asphalt Pavement Potential Damage Index

Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM

Pavement premature failure on a moisture susceptible base

Modeling of Rutting in Asphalt Flexible Pavement

Analysis of Asphalt Geogrid Reinforced Pavement Rutting by Finite Element Method

Modeling Asphalt Pavement Rutting under Accelerated Testing

Pavement Structure Optimization Analysis of Basalt Fiber High Modulus Asphalt Mixture

Experimental evaluation and theoretical analysis of multi-layered road cumulative deformation under dynamic loads

Finite element analysis of rutting on full depth asphalt pavement in port area considering temperature field