Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

Finite element analysis of rutting on full depth asphalt pavement in port area considering temperature field

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

EXTENDED FINITE ELEMENT NUMERICAL SIMULATION FOR REFLECTIVE CRACK OF ASPHALT PAVEMENT

Fatigue Damage Analysis of Asphalt Pavement with Reflecting Cracks under Varying Temperature

Elastoplastic Analysis of Asphalt Concrete Pavement

Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM

Mechanical Analysis of the Effect of Overloading on Pavement Performance

Influence of temperature and humidity coupling on rutting deformation of asphalt pavement

Analysis of Asphalt Geogrid Reinforced Pavement Rutting by Finite Element Method

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Effect of high temperature and traffic loading on rutting performance of flexible pavement

Modeling of Rutting in Asphalt Flexible Pavement

Analysis of primary influencing factors and indices distribution law of rutting performance of asphalt mixtures

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Numerical Analysis on Deformation of Pavement and Soft Clay Ground Interaction for Cyclic Loads

Assessment of Factors Affecting Pavement Rutting in Pakistan Using Finite Element Method and Machine Learning Models

A Design Method on Durable Asphalt Pavement of Flexible Base on Anti-Rutting Performance and Its Application

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load