Abstract:The static drill rooted nodular pile is a new type of pile foundation consisting of precast nodular pile and the surrounding cemented soil.This composite pile has a relatively high bearing capacity and the mud pollution will be largely reduced during the construction process by using this type of pile.In order to investigate the bearing capacity and load transfer mechanism of this pile,a group of experiments were conducted to provide a comparison between this new pile and the bored pile.The axial force of a precast nodular pile was also measured by the strain gauges installed on the pile to analyze the distribution of the axial force of the nodular pile and the skin friction supported by the surrounding soil,then 3D models were built by using the ABAQUS finite element program to investigate the load transfer mechanism of this composite pile in detail.By combining the results of field tests and the finite element method,the outcome showed that the bearing capacity of a static drill rooted nodular pile is higher than the bored pile,and that this composite pile will form a double stress dispersion system which will not only confirm the strength of the pile,but also make the skin friction to be fully mobilized.The settlement of this composite pile is mainly controlled by the precast nodular pile;meanwhile,the nodular pile and the surrounding cemented soil can be considered as deformation compatibility during the loading process.The nodes on the nodular pile play an important role during the load transfer process,the shear strength of the interface between the cemented soil and the soil of the static drill rooted pile is larger than that of the bored pile.

STUDY ON LOADS TRANSFERRING MECHANISM OF COMPOSITE GROUNDS WITH CONCRETE PILES

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

Test Research on the Behavior of Composite Foundations Incorporating Rigid and Flexible Piles

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

Settlement of composite ground reinforced by deformable piles

Research on In-Situ Tests of Pile Load Transfer Behaviors in Composite Foundation with Rigid-Flexible Piles

In-situ Experiment on Urban Road Subgrade Improved by Plain Concrete Pile and Mixed-in-place Pile

STUDY ON SINGLE RIGID PILE GROUND IMPROVEMENT MODEL UNDER EMBANKMENT

Working Behavior of Composite Ground Improved by Rigid Piles Under Flexible Foundation

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

Practical Method for the Pile Composite Ground under Flexible Foundation Based on Super-Substructure Interaction

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Testing and Modeling the Behavior of Pre-Bored Grouting Planted Piles under Compression and Tension

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

Field tests and consolidation analysis of gravel pile composite foundation

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

Load Transfer Rule of Composite Ground under Flexible Foundation

Centrifugal Model Tests on Working Behavior of Composite Foundation Reinforced by Rigid Piles with Caps Under Embankment

A test on base bearing capacity of static drill rooted nodular pile